What Phase Is This?

[Gazcobain]

My 306 has the circular fog lights, is fully colour-coded but does not seem to have the bolt-holes on the underside of the tailgate for connecting a spoiler. I've read that some Phase 3s were manufactured but can still have some Phase 2 parts.

Any thoughts on this, folks?

Cheers.

[hbomb1905]

It's a full Phase 3 but because of the spec it won't ever have had a spoiler. If you want one you'll need to drill holes or just bond one on with tiger seal or similar.

[welshpug]

yup, phase3 base spec.

[Gazcobain]

Ah right, I see. I thought they all had the holes on the inside regardless of whether they'd ever have had a spoiler or not.

Much appreciated, folks.

[Toms306]

They do all have holes on the inside, covered with a black circular sticker, much higher than you expect from looking outside though so maybe you're not looking in the right place.

[PugRory]

The spoiler I got from a scrappy had four 10mm nuts holding it on through the rear screen

[Toms306]

The spoiler I got from a scrappy had four 10mm nuts holding it on through the rear screen

That was an older spoiler from a ph1/2. Ph3 spoilers use two T20 bolts through the metal.

[MY95]

Defo full PH3 mate! Mines in the exact same colour!
Mine looked the exact same until I added Ph2 rear spoiler, cyclones and debadged GLX side badges

[7057sam]

Slightly off topic

When I was looking for a 6 I came across a late 1999 nile blue (phase 2 ) but it had Ph3 rub strips and Ph3 dials.I heard some did come out of the factory like that.

[Eeyore]

They do all have holes on the inside, covered with a black circular sticker, much higher than you expect from looking outside though so maybe you're not looking in the right place.

this!

[Gazcobain]

Many thanks for all the replies, much appreciated.

Would any soul be kind enough to post a picture of where the mounting holes should be? I simply cannot see them