Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
OBY the Black DTurbo
#61
I loved my one of those, feels like a different car when you first drive it!
#62
(03-10-2014, 06:43 PM)JJ0063 Wrote: I loved my one of those, feels like a different car when you first drive it!

Yeah feels immensely better! Especially with the new suspension
#63
Where did you get the wheel/boss?
Looks well.
#64
(03-10-2014, 11:39 PM)mcglynn Wrote: Where did you get the wheel/boss?
Looks well.

eBay mate boss is from demonstweeks and the wheel is off eBay also Smile
#65
car is looking well, looks nice 'n' clean also. +1 for a splitter,would finish the car off nicely
#66
(04-10-2014, 08:24 AM)willJspears Wrote: car is looking well, looks nice 'n' clean also. +1 for a splitter,would finish the car off nicely

Thanks man Smile it's getting there, should be getting a Laguna splitter once piggy gets his new one
#67
(22-08-2014, 08:40 AM)Jamieh2013 Wrote: I want another black d turbo :/

So do I! Was looking at photos of my old one the day Sad if it didnt have as many miles id still be driving it I miss it something serious
#68
So tried fixing the issue with my key fob but to luck :/ it locks and unlocks the car fine but won't start it unless you turn the ignition on with the spare key then take it out and use the key fob to start it. I've replaced the transponder sensor but no luck. Anyone have any advice? 

[attachment=21217]
#69
Got some Avo coilovers off Ian (slamwagon) fitted today made it low as f*ck lol but handles awesome just have to watch out for every little bump, next up is my intercooler and Bosch pump
[attachment=21427]

[attachment=21428]

[attachment=21429]

[attachment=21430]
#70
Wow that low Smile

I give it a week before you raise it up lol
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
#71
(30-01-2015, 11:48 PM)7057sam Wrote: Wow that low Smile

I give it a week before you raise it up lol

Haha yeah will be raised at some point lol bad thing is they can still go lower
#72
Nathan! you should be playing with the 106 not with the 306!
#73
(31-01-2015, 12:17 AM)procta Wrote: Nathan! you should be playing with the 106 not with the 306!

Haha I know but this car needs attention too, the suspension was knocking badly and was bouncing around. This needs some work done to it. End of February I'm getting the new beam for the 106 Smile 
#74
(04-10-2014, 07:52 AM)Nathan1305 Wrote:
(03-10-2014, 11:39 PM)mcglynn Wrote: Where did you get the wheel/boss?
Looks well.

eBay mate boss is from demonstweeks and the wheel is off eBay also Smile

Is it genuine OMP or a decent replica with stickers applied?
I kind of sort of definitely really want one becauseracecar. Big Grin

Edit: Seen on another thread that it isn't genuine. Got a link for the wheel and boss mate? It looks great in the car and the car is looking really good overall now with a bit of a drop!
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.

62k Diablo Phase 1 Gti-6:
Project Thread
#75
(02-02-2015, 12:27 PM)RetroPug Wrote:
(04-10-2014, 07:52 AM)Nathan1305 Wrote:
(03-10-2014, 11:39 PM)mcglynn Wrote: Where did you get the wheel/boss?
Looks well.

eBay mate boss is from demonstweeks and the wheel is off eBay also Smile

Is it genuine OMP or a decent replica with stickers applied?
I kind of sort of definitely really want one becauseracecar. Big Grin

Edit: Seen on another thread that it isn't genuine. Got a link for the wheel and boss mate? It looks great in the car and the car is looking really good overall now with a bit of a drop!

http://pages.ebay.com/link/?nav=item.vie...1442877895 That's the boss, can't fint the wheel I paid £75 for it

[attachment=21508]

Power steering is fixed Smile the pipe is a little to wide for the rubber hoses so hoping it holds up. Feels a lot better with fresh fluid in the system 
#76
I see, thanks!
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.

62k Diablo Phase 1 Gti-6:
Project Thread
#77
So will be attempting to fix the DT tomorrow with a replacement heat exchanger and an oil change, coolant change and new oil filter hopefully this will fix the issue I have where the oil is in the expansion tank. Any tips or advice on bleeding the cooling system? 
[attachment=21608]
#78
I see you fitted the avos exactly as Ian left them - ie wound so far down he may have possibly needed to cut more thread. lol

Very tidy project this, expecting great things based on your work so far. Wink
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



#79
(09-02-2015, 04:42 PM)Poodle Wrote: I see you fitted the avos exactly as Ian left them - ie wound so far down he may have possibly needed to cut more thread. lol

Very tidy project this, expecting great things based on your work so far. Wink

Thanks mate yeah we just though f*ck it lets see how low we can get it lol and I'm hoping for great things but have run into an issue that may change things :/
#80
Oh really, found some rot?
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



#81
(10-02-2015, 06:34 AM)Poodle Wrote: Oh really, found some rot?

No engine issues, expansion tank has oily sludge floating to the top, so trying to source a new expansion tank and flush and re-bleed the system to see if it stops it. If it comes back again then I suspect it's head gasket :/
#82
Ah... Good old dts. lol

Hg isn't terminal though, wouldn't you try and fix it? Any other symptoms?
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



#83
[attachment=22506]

[attachment=22507]

[attachment=22508]

[attachment=22509]

Got my intercooler mounted today Smile just need to do the manifold and pipe work next
#84
Looks good man. When is it being plumed in?
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
#85
(05-04-2015, 07:45 PM)bashbarnard Wrote: Looks good man. When is it being plumed in?

Thanks mate Smile and when I can get the xantia manifold on haha. Gonna look up how to remove it now 
#86
Cleaned up pretty well considering it hasn't been washed in like 6 months haha. Treated it to a wash, Polish and wax. Took all the seats out and gave the carpet a clean, looks and smells great Smile 
[attachment=22578]

[attachment=22579]
#87
Looking good! Needs black masks!

Get to Halfords & buy some Meguiars endurance tyre gel Smile
#88
(08-04-2015, 09:13 PM)JJ0063 Wrote: Looking good! Needs black masks!

Get to Halfords & buy some Meguiars endurance tyre gel Smile

Hopefully getting another set of crystals soon so I can black mask them as only 1 clip is holding these lights on haha. And going to get some new tyres and buy some tyre gel Smile want to invest more into this car. Hoping to keep it for a long time
#89
All that effort is ruined by the hockey stick I'm afraid! lol

Another vote for the Megs EG though, great stuff!!
#90
(08-04-2015, 09:59 PM)Toms306 Wrote: All that effort is ruined by the hockey stick I'm afraid! lol

Another vote for the Megs EG though, great stuff!!

I need some clips haha there pissing me off now lol


Possibly Related Threads…
Thread Author Replies Views Last Post
  Phase 1 Black 306 DTurbo - Road Test! (GT2052S, 11mm, FMIC) silverzx 171 114,020 23-03-2015, 03:21 PM
Last Post: bashbarnard
  Ph1 black 306 dturbo BenDturbo1 9 4,570 17-08-2014, 01:57 PM
Last Post: dashmader
  Black Phase 2 dturbo. (4waydiablos old car) adamm306 102 41,177 22-03-2014, 08:23 PM
Last Post: adamm306

Forum Jump:


Users browsing this thread: 1 Guest(s)