Posts: 67
Threads: 1
Joined: Dec 2014
Location: La Rioja (Spain)
Car Model/Spec: 306 XSDT
Hello Guys.
My name is Iván , im from La Rioja (Spain)
I am the owner of a 306 XSDT Phase1
My english is not really good but im here to learnig about this cars!
Regards
Posts: 5,902
Threads: 142
Joined: Dec 2011
Reputation:
58
Location: Hastings, East Sussex
Car Model/Spec: E46 BMW 320d
Welcome along, always nice to get new members from overseas! Yours looks like a pretty good base to start from, have you got any plans for how you want it to end up? Or are you keeping it as a sensible daily driver?
Posts: 13,881
Threads: 476
Joined: Dec 2011
Reputation:
81
Location: Ipswich
Car Model/Spec: 306 Rallye
Hola! Me llamo Sam. Tengo 22 anos. Vivo en londres. Tengo un Peugeot 306 1.8 meridian.
Posts: 5,902
Threads: 142
Joined: Dec 2011
Reputation:
58
Location: Hastings, East Sussex
Car Model/Spec: E46 BMW 320d
(01-12-2014, 11:08 AM)SRowell Wrote: Hola! Me llamo Sam. Tengo 22 anos. Vivo en londres. Tengo un Peugeot 306 1.8 meridian.
Show off.
Posts: 67
Threads: 1
Joined: Dec 2014
Location: La Rioja (Spain)
Car Model/Spec: 306 XSDT
this is the car when i buy it
![[Image: Haf4Ekll.jpg]](http://i.imgur.com/Haf4Ekll.jpg)
The last week i change the Logotype, put on the skirts ( i dont know if this is the correct word) and painted the mirrors.
when i wear out the wheels i probably mount the XSI wheels, change the suspension for a bilstein/eibach, and wait for new ideas for the inside.
Im really sorry if my english is so bad
Posts: 1,208
Threads: 81
Joined: Jun 2014
Reputation:
2
Location: East Mids
Car Model/Spec: Black Rallye
(01-12-2014, 11:08 AM)SRowell Wrote: Hola! Me llamo Sam. Tengo 22 anos. Vivo en londres. Tengo un Peugeot 306 1.8 meridian.
Tengo means "I have". This exhausts my Spanish.
CLUB RALLYE
||AVO Race GTX Coilovers||Signature Blue Steels||P1 VTS Rack||Hybrid ARB||21mm Torsion Bar||rich_w Flywheel||
Posts: 5,902
Threads: 142
Joined: Dec 2011
Reputation:
58
Location: Hastings, East Sussex
Car Model/Spec: E46 BMW 320d
(01-12-2014, 11:25 AM)Orta Wrote: (01-12-2014, 11:08 AM)SRowell Wrote: Hola! Me llamo Sam. Tengo 22 anos. Vivo en londres. Tengo un Peugeot 306 1.8 meridian.
Tengo means "I have". This exhausts my Spanish. Apparently, according to google translate, it also means "I am".
Looks like the bodywork has seen better days, but with a bit of love and attention, should be easy enough to repair. Good to see you ditched those "interesting" wheel trims though, and by xsi wheels, i assume you mean these:
Sounds like you've got some good plans anyway, might as well get a project thread up as well, so we can track your progress.
Oh, and don't worry about your english, you seem to have a better grasp of it than a majority of english people!
Posts: 13,881
Threads: 476
Joined: Dec 2011
Reputation:
81
Location: Ipswich
Car Model/Spec: 306 Rallye
(01-12-2014, 11:25 AM)Orta Wrote: (01-12-2014, 11:08 AM)SRowell Wrote: Hola! Me llamo Sam. Tengo 22 anos. Vivo en londres. Tengo un Peugeot 306 1.8 meridian.
Tengo means "I have". This exhausts my Spanish.
yes.... I have 22 years.... genuinely correct!
Posts: 67
Threads: 1
Joined: Dec 2014
Location: La Rioja (Spain)
Car Model/Spec: 306 XSDT
01-12-2014, 12:14 PM
(This post was last modified: 01-12-2014, 12:20 PM by Brookei.)
thanks for the welcome!!! I see this is an active forum , thats good
i have a lot of ideas, but first i will repair the damage.
Two question :
anyone have a logotype like mine in this forum?
and what you think about this?
(01-12-2014, 11:44 AM)WiNgNuTz Wrote: (01-12-2014, 11:25 AM)Orta Wrote: (01-12-2014, 11:08 AM)SRowell Wrote: Hola! Me llamo Sam. Tengo 22 anos. Vivo en londres. Tengo un Peugeot 306 1.8 meridian.
Tengo means "I have". This exhausts my Spanish. Apparently, according to google translate, it also means "I am". 
Looks like the bodywork has seen better days, but with a bit of love and attention, should be easy enough to repair. Good to see you ditched those "interesting" wheel trims though, and by xsi wheels, i assume you mean these:
![[Image: attachment.php?thumbnail=12663]](http://306oc.co.uk/forum/attachment.php?thumbnail=12663)
Sounds like you've got some good plans anyway, might as well get a project thread up as well, so we can track your progress. 
Oh, and don't worry about your english, you seem to have a better grasp of it than a majority of english people!  Yes , those wheels, and probably this week i paint the black wheels i have now. I think they will be better in white  , and i will paint the defense in black matte, the originally black is a bit worn.
You think is better if I continue this on a Project thread?
Posts: 5,902
Threads: 142
Joined: Dec 2011
Reputation:
58
Location: Hastings, East Sussex
Car Model/Spec: E46 BMW 320d
We are indeed probably one of the most active 306 forums there is.
When you say "logotype", i'm guessing you mean the badge? In which case, I think there is one other that has a badge coloured similar to yours, though his is the later design, can't think who it is off the top of my head though....might have a quick root through the projects and see if i can find him.
Not too sure on the black grille myself, but its more about what YOU like, as its your car at the end of the day!
Posts: 67
Threads: 1
Joined: Dec 2014
Location: La Rioja (Spain)
Car Model/Spec: 306 XSDT
Posts: 67
Threads: 1
Joined: Dec 2014
Location: La Rioja (Spain)
Car Model/Spec: 306 XSDT
Posts: 5,902
Threads: 142
Joined: Dec 2011
Reputation:
58
Location: Hastings, East Sussex
Car Model/Spec: E46 BMW 320d
Oh yes, that looks good! Fair play to you mate!
Posts: 67
Threads: 1
Joined: Dec 2014
Location: La Rioja (Spain)
Car Model/Spec: 306 XSDT
(02-12-2014, 10:02 PM)WiNgNuTz Wrote: Oh yes, that looks good! Fair play to you mate! 
I make many changes in the car this week , i'm really happy with the results ^^
Posts: 67
Threads: 1
Joined: Dec 2014
Location: La Rioja (Spain)
Car Model/Spec: 306 XSDT
Posts: 2,636
Threads: 102
Joined: Oct 2013
Reputation:
18
Location: Warwickshire
Car Model/Spec: Ph.1 Gti-6 63k
Looks really good on the white steel wheels!!!
I also have a ph.1, if you look in my project thread you'll see a bit about how I made the headlights shiny again, it really freshened up the front of the car. Your headlights are going a bit dark like mine were. You can buy the indicators brand new for about 6 pounds each, and you can easily open up the headlights to clean the black oil out of them and make them shiny again with reflective tape or chrome spray or something. I used reflective tape as that is the easiest!
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.
62k Diablo Phase 1 Gti-6: Project Thread
Posts: 1,310
Threads: 47
Joined: Sep 2013
Reputation:
14
Location: Browsing eBay for Turbos.
Car Model/Spec: Ford cougar v6. Mk6 Transit
Welcome along, car is getting better and better.
I Don't Have A 306.
Posts: 67
Threads: 1
Joined: Dec 2014
Location: La Rioja (Spain)
Car Model/Spec: 306 XSDT
(06-12-2014, 08:33 AM)RetroPug Wrote: Looks really good on the white steel wheels!!!
I also have a ph.1, if you look in my project thread you'll see a bit about how I made the headlights shiny again, it really freshened up the front of the car. Your headlights are going a bit dark like mine were. You can buy the indicators brand new for about 6 pounds each, and you can easily open up the headlights to clean the black oil out of them and make them shiny again with reflective tape or chrome spray or something. I used reflective tape as that is the easiest!
Sorry my english is bad , and i dont know if you are talking about the fog lights ore the big fronts?
Posts: 357
Threads: 11
Joined: Dec 2011
Reputation:
5
The big ones the reflectors behind the glass goes dark over time you can remove the headlight glass and use either spray or reflective tape to make them nice and shiny again it may also improve your headlights at night too.
Posts: 2,636
Threads: 102
Joined: Oct 2013
Reputation:
18
Location: Warwickshire
Car Model/Spec: Ph.1 Gti-6 63k
(06-12-2014, 11:18 AM)Brookei Wrote: (06-12-2014, 08:33 AM)RetroPug Wrote: Looks really good on the white steel wheels!!!
I also have a ph.1, if you look in my project thread you'll see a bit about how I made the headlights shiny again, it really freshened up the front of the car. Your headlights are going a bit dark like mine were. You can buy the indicators brand new for about 6 pounds each, and you can easily open up the headlights to clean the black oil out of them and make them shiny again with reflective tape or chrome spray or something. I used reflective tape as that is the easiest!
Sorry my english is bad , and i dont know if you are talking about the fog lights ore the big fronts?
No problem. I mean the big fronts. You can take the glass off and clean them and use shiny tape or chrome spray paint to make them shiny again.
Here:
http://306oc.co.uk/forum/showthread.php?...#pid471035
The indicators on the sides (the ones that flash orange when you turn) can be bought new for very cheap as well, so the whole front lighting is new and shiny for cheap.
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.
62k Diablo Phase 1 Gti-6: Project Thread
Posts: 4,189
Threads: 61
Joined: May 2012
Reputation:
11
Location: Bury St Edmunds Suffolk
Car Model/Spec: rallye,Astor 6
Hello and welcome
Looks great all cleaned up
Astor 6 Fast road/track project
Posts: 67
Threads: 1
Joined: Dec 2014
Location: La Rioja (Spain)
Car Model/Spec: 306 XSDT
Now i got it!
you use a paint like this?
http://neumaticosyllantasdelpacifico.cl/...lantas.jpg
and dont have any problem with the ITV'
Posts: 67
Threads: 1
Joined: Dec 2014
Location: La Rioja (Spain)
Car Model/Spec: 306 XSDT
(06-12-2014, 03:41 PM)7057sam Wrote: Hello and welcome
Looks great all cleaned up 
Thanks Sam
Posts: 67
Threads: 1
Joined: Dec 2014
Location: La Rioja (Spain)
Car Model/Spec: 306 XSDT
Since last week im searching for a suspension, i search specially for bilstein and eibach, but i find a kayaba completly new for a really good price and probably a 2 apex for a really good price.
Posts: 18,242
Threads: 386
Joined: Dec 2011
Reputation:
87
Location: Suffolk
Car Model/Spec: Focus Titanium
ITV over here is called MOT, and it isn't anywhere near as strict! As long as the light is the right colour and heads in the direction it should be fine.
Posts: 67
Threads: 1
Joined: Dec 2014
Location: La Rioja (Spain)
Car Model/Spec: 306 XSDT
![[Image: fc818242125ef342cae9389d2819bcbb.jpg]](http://tapatalk.imageshack.com/v2/14/12/07/fc818242125ef342cae9389d2819bcbb.jpg) ![[Image: b4f6f14809c9495b9edff7565d5f1f8b.jpg]](http://tapatalk.imageshack.com/v2/14/12/07/b4f6f14809c9495b9edff7565d5f1f8b.jpg)
Two pics of the kayaba
Posts: 2,636
Threads: 102
Joined: Oct 2013
Reputation:
18
Location: Warwickshire
Car Model/Spec: Ph.1 Gti-6 63k
(07-12-2014, 09:11 PM)Brookei Wrote: Now i got it!
you use a paint like this?
http://neumaticosyllantasdelpacifico.cl/...lantas.jpg
and dont have any problem with the ITV'
I used tape:
http://www.tlc-direct.co.uk/Images/Produ...LAT100.JPG
You aren't putting it on anything that changes the aim or reflection of the headlights so it *shouldn't* be a problem.
When you open the lights you will see that it is just the surround that goes dark and bad that needs doing and not the actual headlight reflector.
The indicators on the sides can be bought new for very cheap:
http://www.ebay.co.uk/itm/Peugeot-306-Mk...540945ca83
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.
62k Diablo Phase 1 Gti-6: Project Thread
Posts: 67
Threads: 1
Joined: Dec 2014
Location: La Rioja (Spain)
Car Model/Spec: 306 XSDT
I really dont know if i whant a clean look on the lights or a dark look like this
http://tapatalk.imageshack.com/v2/14/10/...9091b9.jpg
i have a lot of doubts
Posts: 67
Threads: 1
Joined: Dec 2014
Location: La Rioja (Spain)
Car Model/Spec: 306 XSDT
Posts: 5,205
Threads: 91
Joined: Dec 2011
Reputation:
83
Location: Oxfordshire/Cornwall
Car Model/Spec: Moonstone DT/Volvo V50
Spanish works same as French in that respect...
J'ai 22 ans = I have 22 years = I am 22 years old
Same as..
Tengo 22 años
EDIT: What Sam said means "I have 22 anuses" - lolz - you need the squiggle above the n of años otherwise it doesn't quite mean what you intended.
(16-05-2016, 10:45 AM)Toms306 Wrote: Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in.  Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
|