Posts: 1,208
Threads: 81
Joined: Jun 2014
Reputation:
2
Location: East Mids
Car Model/Spec: Black Rallye
Thanks: 2
Given 8 thank(s) in 8 post(s)
Been in or around 306s since 2006. Had a China Phase 2 DTurbo-S 2006-2008, it had a derv doctor stage 1 tune and wore diy painted gti skirts and diy painted black harriers. Was a beast and it got me to college and back, and then work and back for the first few years of my adult life. Had a Fabia vRS for a time after that, then a Citroen C2 VTS, then was back to a Phase 3 Black GTi-6 which I loved absolutely. It had a Bilstein B8s all round, Group N Engine mounts, 30mm Eibach Springs, a K'N and a full Magnex exhaust. I ran that for two years until swapping it in for a more modern, and horrid, Astra H 1.9 CDTi150.
So when I decided I wanted another 306 it was a difficult decision to decide which model I wanted. I'd had two GTIs (Had a Diablo as well) and an XUD so decided it had to be a Rallye. I'd gone through stranges about 5 or 6 years ago wanting a White One, mainly because of Ben's magazine feature from the .net years ( Click Here) and then a red one. But as I've always strove for the highest spec / the rarest model I decided it had to be the Black Rallye. Only a 100 were ever made, and according to howmanyleft.com there's left than 50 left (That's included sorn'd vehicles) so exclusivity is almost guaranteed. (That is of course besides Dum Dum, MattRallye & INXS to name a few on here )
To cut a long story short I have no intention of using my Black Rallye as a daily. There's too few of them left and I'm wanting to keep this as a very long term project (5-10 years) so wanna keep the miles off as much as possible.
Bought T436 CNH from Chris (BigBadBowen from gti6.com) after a long ol' trip "down south" where I'd arranged to view a couple in the same day. The second was a lot further south, a lot cheaper and not in as good a condition. So I plumped up some notes for Mr. Bowen's Rallye. I think I didn't get a bad deal considering the work that had gone into the car, it's had a 50k Xsara VTS engine, new Aux and cam belts. As well as new brakes, good tyres a few other bits and bobs including uprated engine mounts.
It was a horrid trip home. Bad traffic, torrential rain and following my Dad doing 50mph the entire way. But despite this the Rallye still made it fun!! The exhaust note is infectious and the handling so sharp. Every roundabout can be viewed as a challenge!
I'm an avid reader of other's project threads. In particular 306gti6.com has some of the very best GTi/Rallye themed threads, and I've in particular been inspired for the overall look by 7075sam's Black Rallye before he broke it for parts! And Braymond's "Rallye-R". These two cars represent some of the best Rallye's the scene has produced in the last few years and are definitely inspirations.
My take on the Rallye may not be one for the purists and my black/red theme was inspired by Daysgti6's old '6 from some years ago Click Here
But one thing I definitely want to get right is the underside and the general clean up of some 13,14 years of grim build up. For this hours of tedious work I blame Mik's Rallye and Coskev's who showed us all how these cars should look underneath.
So want to keep the thread up to date, and I'll edit the "contents" at the top as often as I can so people can quickly navigate to points of interest.
Plans are:
Overall I want the car to be a light track use / fast road weapon that I can enjoy. There's some cracking roads near where my parents live and it's one of the few places left in the country you can really enjoy a good car.
I've got winter 14/15 to prepare the car to a standard where I can show it for Summer 2015. Gonna be going to FCS, Pugfest, Trax etc this next year so hoping to go with one 306 club or another not in the car park!!!
1). Get Lambda Fixed DONE
2). Red Decals DONE
3). Replace Windscreen DONE
4). Fit new scuttle panel DONE
5). All new bulbs behind the dash DONE
6). Get Bilstein & Springs fitted
7). Get some tyres for gloss black steels and fit
8). Speed holes DONE
9). Fit Strut Brace DONE
10). Fix various areas of interior trim DONE
11). Paint Inlet Manifold & Cam Covers
12). Clean and Tidy up Engine Bag
13). Sort this Got some rust...
done
14). De Wiper Rear DONE
15). De Aerial DONE
16). Paint Brake Calipers Black DONE
17). Gloss Black Scuttle Panel, Fuel Cap, etc etc DONE
18). Dye Interior Roof Liner Black DONE
19). Hekos
20). Sun Strip
21). Get a second key cut
22). Fit Red Towing Strap
23). Fit new "clean" license plates done
24). Xsara Washer Jetsdone
25). Start underneath Clean
26). OEM Peugeot Rubber Mats
Then Winter 15/16...
1). Carry on underneath clean
2). Source & Fit Black/Red Pipes for engine bay
3). Finally make decision whether to cage/harness bar/keep standard interior
4). New Full Exhaust (Jetex or similar)
5). Rear Shocks
6). Rear Tints
7). Xsara VTS Phase 1 Steering Rack done
8). Hybrid ARB
9). Phillipm Lower Brace
10). Bosch Aero Wipers
11). Uprate to JBL 626e or Alpine SXE1725 front speakers
Then after that (Long Term)
1). Supercharger
2). Full Respray
3). Smooth out Bonnet Badge
4). Smooth tailgate
I'll try and keep this first post updated as and when there are updates.
Started like this:
Currently looks like this:
Then the car went through a change in looks for 2017:
image upload
CLUB RALLYE
||AVO Race GTX Coilovers||Signature Blue Steels||P1 VTS Rack||Hybrid ARB||21mm Torsion Bar||rich_w Flywheel||
Posts: 2,125
Threads: 210
Joined: Feb 2014
Reputation:
1
Location: Bristol
Car Model/Spec: Ph1 White Gti6/306 DTurbo
Thanks: 19
Given 7 thank(s) in 7 post(s)
Looks like this will be a great project I'll keep an eye out for this
Posts: 5,946
Threads: 141
Joined: Oct 2012
Reputation:
35
Location: Herefordshire
Car Model/Spec: 106 rallye, GTi6, Hdi dturbo
Thanks: 3
Given 14 thank(s) in 14 post(s)
Looks great dude you've bought at the right time too, petrol is still under £2 per litre and the rallye is a couple of years away from being a classic
Current stable
'09 Mercedes E320cdi wagon
'99 306 gti6
Posts: 6,569
Threads: 183
Joined: Dec 2011
Reputation:
20
Location: eastwood/notts
Car Model/Spec: moonstone hdi #2
Thanks: 0
Given 8 thank(s) in 8 post(s)
Looks a good buy mate. Where's the rust at?
I was also running scorpion back box with standard system, but now I have scorpion back box with straight through middle section... sounds like porn! Need to get hold of a cat to butcher up.
#2 Moonstone Blue HDI
Posts: 2,636
Threads: 102
Joined: Oct 2013
Reputation:
18
Location: Warwickshire
Car Model/Spec: Ph.1 Gti-6 63k
Thanks: 0
Given 22 thank(s) in 22 post(s)
16-08-2014, 05:06 AM
(This post was last modified: 16-08-2014, 05:07 AM by RetroPug.)
(15-08-2014, 10:11 PM)kentiiboii Wrote: Looks a good buy mate. Where's the rust at?
I was also running scorpion back box with standard system, but now I have scorpion back box with straight through middle section... sounds like porn! Need to get hold of a cat to butcher up.
Is that setup loud? I've heard it sounds really good from several people.
I like good but I'm not a huge fan of loud.
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.
62k Diablo Phase 1 Gti-6: Project Thread
Posts: 1,208
Threads: 81
Joined: Jun 2014
Reputation:
2
Location: East Mids
Car Model/Spec: Black Rallye
Thanks: 2
Given 8 thank(s) in 8 post(s)
(15-08-2014, 10:11 PM)kentiiboii Wrote: Looks a good buy mate. Where's the rust at?
I was also running scorpion back box with standard system, but now I have scorpion back box with straight through middle section... sounds like porn! Need to get hold of a cat to butcher up.
Just behind the front wheels where folk jack up the wrong place! Gonna get welding this week.
I'm wanting to run a decat setup, it's just such a job of changing the cat back in for MOT!
Also, random glory shot...
CLUB RALLYE
||AVO Race GTX Coilovers||Signature Blue Steels||P1 VTS Rack||Hybrid ARB||21mm Torsion Bar||rich_w Flywheel||
Posts: 6,569
Threads: 183
Joined: Dec 2011
Reputation:
20
Location: eastwood/notts
Car Model/Spec: moonstone hdi #2
Thanks: 0
Given 8 thank(s) in 8 post(s)
Im going to cut the cat open and weld a pipe in.
My emissions was really low on mot, sp may get away with no cat. So if box there its less work.
#2 Moonstone Blue HDI
Posts: 1,208
Threads: 81
Joined: Jun 2014
Reputation:
2
Location: East Mids
Car Model/Spec: Black Rallye
Thanks: 2
Given 8 thank(s) in 8 post(s)
Small update. Going to Wales tomorrow with yippiekiyay (from 306gti6.com) tomorrow on a jaunt (He's got a white rallye, I've a black and a friend of his a red so should make for some good photo ops). The car had been cleaned prior to be buying it but wasn't up to my standards. So had a 4+ hour session on the old girl, don't think she'd been cleaned this rigorously in years! Forgot to take some before pics but I'm sure you can imagine it.
Started off with a standard triple wax, (twice), followed by a full T-Cut which removed 80% of the marks and surface scratches that littered the bodywork. Had some black T-Cut left over from my old Black GTi (Which I sold 3 years ago!). Then cleaned it down again with triple wax. Then came the polish. Then went around with some touch up paint (again left over from my black GTi), then full shampoo'd the interior. To be honest I can't believe it's come out as well as it did.
Few pics:
image sharing sites
Can just see the Diablo peaking out of the garage in a couple of the pics.
The eagle eyed among you will have noticed the car is "naked" of it's Rallye decals. I've had my fresh set delivered today, was going to apply them this evening but ran out of daylight, but I'd taken the old moldy ones off before washing it. But they're going on tomorrow morning.
Also did a little dewipering earlier. Three reasons 1). Saving weight! 2). I made £10 selling the part on eBay and 3). I absolutely HATE rear wipers.
forum image hosting
CLUB RALLYE
||AVO Race GTX Coilovers||Signature Blue Steels||P1 VTS Rack||Hybrid ARB||21mm Torsion Bar||rich_w Flywheel||
Posts: 1,208
Threads: 81
Joined: Jun 2014
Reputation:
2
Location: East Mids
Car Model/Spec: Black Rallye
Thanks: 2
Given 8 thank(s) in 8 post(s)
I'll tell you how these car days out always go. Firstly SWMBO isn't happy that 1). I'm out all day and 2). I'm "wasting" £60-70 worth of fuel, but hey ho. Dragged myself out of bed at 5am to get a good early start as our destination is Wales and I'm the furthest North and the furthest East. Met up with ndy (yippiekiyay) and entourage at some services near Redditch.
We both shared an understanding of the enormity of the journey ahead so wasted little time with pleasantries, tanked up and got underway immediately. Meeting Braymond's Rallye in person was a humbling event as the thing is beautiful, even better looking in person than any project thread, even an exceptionally photographed and well written as his can do justice.
It was also... much quicker than mine! After a quick stop in a town with a typically Welsh name where I tried and almost failed to fit into the very snug bucket seats in the White Rallye we met up with Kerry, owner of the Red Rallye. Whilst I'd never been hugely struck on Cherry, Kerry's is the best example of the colour I've seen (Well equal to Alee83's from .net) especially for paintwork brightness. The side skirts weren't even pink! :lol
We also met up with a few other South West/Welsh gents and lasses with a variety of vehicles from a Mk2 Escort RS, a Focus ST, and a Clio v6.
We then headed up to the Beacons. Amazing roads, barely any traffic. It was spectacular! We stopped for a photoshoot, enjoyed some RWD donuts from the Escort and then it was 5pm! With work looming the day after it was time to pack up and head home, but a great day out...
CLUB RALLYE
||AVO Race GTX Coilovers||Signature Blue Steels||P1 VTS Rack||Hybrid ARB||21mm Torsion Bar||rich_w Flywheel||
Posts: 2,086
Threads: 93
Joined: Dec 2011
Reputation:
8
Location: On a soap box
Car Model/Spec: Stock HDi Meridian & Mk2 MX-5
Thanks: 0
Given 1 thank(s) in 1 post(s)
Mountain Rd over the Beacons, it's a beauty!
Car looks lovely, not sure about the all red decals though.
Diablo Meridian HDi - 125bhp - 73.0MPG - Halfords Wheels
Posts: 15,646
Threads: 541
Joined: Dec 2011
Reputation:
124
Location: Aylesbury
Car Model/Spec: 320bhp Impreza WRX
Thanks: 7
Given 59 thank(s) in 58 post(s)
Stunning car, will be good to see how you get on with all the work as mine is getting a similar treatment.
Posts: 490
Threads: 24
Joined: Dec 2011
Reputation:
1
Location: Chesterfield
Car Model/Spec: 530i Sport/306 Rallye
Thanks: 0
Given 1 thank(s) in 1 post(s)
Looks lovely, why did you choose to go all red decals though?
Black 306 Rallye
Topaz Blue E39 530i Sport
Nordic Green 406 1.9TD
Posts: 143
Threads: 16
Joined: Jul 2014
Reputation:
0
Thanks: 1
Given 2 thank(s) in 2 post(s)
Very tidy looking car you've got there! Can't say I'm a fan of the red decals but as long as you're happy with them that's what matters. Were those pictures taken on or near the A4069?
Posts: 1,208
Threads: 81
Joined: Jun 2014
Reputation:
2
Location: East Mids
Car Model/Spec: Black Rallye
Thanks: 2
Given 8 thank(s) in 8 post(s)
(24-08-2014, 12:02 PM)Dum-Dum Wrote: Stunning car, will be good to see how you get on with all the work as mine is getting a similar treatment.
Gonna be on it as soon as I sorn in October!
(28-08-2014, 01:16 AM)INXS Wrote: Looks lovely, why did you choose to go all red decals though?
Just to be different ;-) had the idea in my head for a while! Didn't think they'd go down too well but heyho!
(28-08-2014, 06:59 AM)mattsrallye Wrote: Very tidy looking car you've got there! Can't say I'm a fan of the red decals but as long as you're happy with them that's what matters. Were those pictures taken on or near the A4069?
It most certainly was my friend great driving road. Can't wait to go back. Gotta be careful tho a couple of the boys clipped stones and knackered their tyres!
CLUB RALLYE
||AVO Race GTX Coilovers||Signature Blue Steels||P1 VTS Rack||Hybrid ARB||21mm Torsion Bar||rich_w Flywheel||
Posts: 143
Threads: 16
Joined: Jul 2014
Reputation:
0
Thanks: 1
Given 2 thank(s) in 2 post(s)
(28-08-2014, 07:18 AM)Orta Wrote: It most certainly was my friend great driving road. Can't wait to go back. Gotta be careful tho a couple of the boys clipped stones and knackered their tyres!
Good stuff! I'm hopefully going to be up that way in a couple of weeks so I'm planning an early morning raid but I'll look out for stones
Posts: 1,208
Threads: 81
Joined: Jun 2014
Reputation:
2
Location: East Mids
Car Model/Spec: Black Rallye
Thanks: 2
Given 8 thank(s) in 8 post(s)
Steels arrived today...
Should be getting some Yokohama's soon, fitted and hit with the lowering stick and sorted ;-) Won't have any of this done intime for the South Mids meet, the End of Season Expo or the Hereford Rolling Road tho haha, will be done by next show season though!
CLUB RALLYE
||AVO Race GTX Coilovers||Signature Blue Steels||P1 VTS Rack||Hybrid ARB||21mm Torsion Bar||rich_w Flywheel||
Posts: 1,208
Threads: 81
Joined: Jun 2014
Reputation:
2
Location: East Mids
Car Model/Spec: Black Rallye
Thanks: 2
Given 8 thank(s) in 8 post(s)
Still haven't got the steels on, think they won't break cover until next year now as the car's hibernation starts in a couple of weeks.
Anyway finally sourced a air conless black phase 2 dash centre fascia, a big thanks to gpm (from 306gti6.com) for coming across it by accident and helping me out!!
BEFORE:
AFTER:
Besides that now, despite having reconnected it, the aerial to the radio doesn't work (But it was always in the plans to de-aerial the car anyway), and the connector's on the 12v were different so had to bodge splice them together it was quite easy.
Very pleased with it, never got why the entire interior was black then to have this stupid silver fascia. I get it on PH3s where there's different silvery bits all over the cabin but not a Rallye.
CLUB RALLYE
||AVO Race GTX Coilovers||Signature Blue Steels||P1 VTS Rack||Hybrid ARB||21mm Torsion Bar||rich_w Flywheel||
Posts: 13,881
Threads: 476
Joined: Dec 2011
Reputation:
81
Location: Ipswich
Car Model/Spec: 306 Rallye
Thanks: 4
Given 104 thank(s) in 102 post(s)
I wouldnt bother daerialing the car. Its a standard part and there is nothing to gain apart from the looks! Only a hundred of these were made so dont f*ck about with it too much.
Posts: 15,646
Threads: 541
Joined: Dec 2011
Reputation:
124
Location: Aylesbury
Car Model/Spec: 320bhp Impreza WRX
Thanks: 7
Given 59 thank(s) in 58 post(s)
Yeah likewise, I wouldn't bother removing it as they aren't exactly offensive to start with.
Posts: 3,419
Threads: 120
Joined: Jan 2014
Reputation:
35
Location: Powys / Herefordshire
Car Model/Spec: Rallye/S16 & 175 megane
Thanks: 147
Given 40 thank(s) in 40 post(s)
(17-10-2014, 09:30 AM)Orta Wrote: Still haven't got the steels on, think they won't break cover until next year now as the car's hibernation starts in a couple of weeks.
Anyway finally sourced a air conless black phase 2 dash centre fascia, a big thanks to gpm (from 306gti6.com) for coming across it by accident and helping me out!!
BEFORE:
AFTER:
Besides that now, despite having reconnected it, the aerial to the radio doesn't work (But it was always in the plans to de-aerial the car anyway), and the connector's on the 12v were different so had to bodge splice them together it was quite easy.
Very pleased with it, never got why the entire interior was black then to have this stupid silver fascia. I get it on PH3s where there's different silvery bits all over the cabin but not a Rallye.
Ah i see what you mean now, yes that centre does look alot better in black much more in keeping with the rallye style.
To echo the above, i would just put a shorter aerial on.. just like i already have
Cant wait to see what this pulls on the dyno sunday
Team Cyril
Posts: 1,208
Threads: 81
Joined: Jun 2014
Reputation:
2
Location: East Mids
Car Model/Spec: Black Rallye
Thanks: 2
Given 8 thank(s) in 8 post(s)
Cheers for the comments guys. *ignores and orders aerial hung off ebay*
Kidding... But I'll need to investigate why the radio won't tune when it did before. Any ideas on common faults?
Looking forward to rr too, I'm hoping for 170... Expecting 160. Anything in between Id be happy with. My old black gti made 169 on a 130k engine and an airbox/exhaust combo so that's my only comparison.
CLUB RALLYE
||AVO Race GTX Coilovers||Signature Blue Steels||P1 VTS Rack||Hybrid ARB||21mm Torsion Bar||rich_w Flywheel||
Posts: 1,208
Threads: 81
Joined: Jun 2014
Reputation:
2
Location: East Mids
Car Model/Spec: Black Rallye
Thanks: 2
Given 8 thank(s) in 8 post(s)
So... Little disappointed. Need to get it looked at me thinks...
CLUB RALLYE
||AVO Race GTX Coilovers||Signature Blue Steels||P1 VTS Rack||Hybrid ARB||21mm Torsion Bar||rich_w Flywheel||
Posts: 19,854
Threads: 581
Joined: Dec 2011
Reputation:
195
Location: Bournemouth
Car Model/Spec: Supercharged 306 GTi6
Thanks: 36
Given 82 thank(s) in 78 post(s)
Thats at the wheel power though isn't it? They were 167 ATF out of the factory so i would estimate about 140-145ATW when brand new so that is a fair old loss!
Also, why has he stopped the run at about 6650? They rev to 7250!
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Posts: 1,208
Threads: 81
Joined: Jun 2014
Reputation:
2
Location: East Mids
Car Model/Spec: Black Rallye
Thanks: 2
Given 8 thank(s) in 8 post(s)
That's 138 atf mate! And was told it shouldn't be revved to limiter on dyno?
CLUB RALLYE
||AVO Race GTX Coilovers||Signature Blue Steels||P1 VTS Rack||Hybrid ARB||21mm Torsion Bar||rich_w Flywheel||
Posts: 2,103
Threads: 122
Joined: Jan 2013
Reputation:
9
Location: south west, devon
Car Model/Spec: Kingfisher Ph1 Dturbo S
Thanks: 1
Given 7 thank(s) in 7 post(s)
They normally rev it until it stops making power
And tbh where hes let off it doesnt look like it wad climbing any higher.
Posts: 4,189
Threads: 61
Joined: May 2012
Reputation:
11
Location: Bury St Edmunds Suffolk
Car Model/Spec: rallye,Astor 6
Thanks: 2
Given 41 thank(s) in 41 post(s)
Have you checked the cam timing?could be why s it's down on power.
Wat do you think of the ad08,thinking about getting a set for summer/trackdays.
Astor 6 Fast road/track project
Posts: 15,646
Threads: 541
Joined: Dec 2011
Reputation:
124
Location: Aylesbury
Car Model/Spec: 320bhp Impreza WRX
Thanks: 7
Given 59 thank(s) in 58 post(s)
19-10-2014, 12:29 PM
(This post was last modified: 19-10-2014, 12:30 PM by Dum-Dum.)
They should rev it till the limiter or till the power is obviously dropping off, not plateauing like yours. Is it definitely in BHP and not KW as those figures are poor for a car that you appear to of thought was OK. 138kw is 185bhp
Posts: 1,208
Threads: 81
Joined: Jun 2014
Reputation:
2
Location: East Mids
Car Model/Spec: Black Rallye
Thanks: 2
Given 8 thank(s) in 8 post(s)
(19-10-2014, 12:28 PM)7057sam Wrote: Have you checked the cam timing?could be why s it's down on power.
Wat do you think of the ad08,thinking about getting a set for summer/trackdays.
Yeah someone said it might be the cam timing. Not sure how I'd check that myself tho?
(19-10-2014, 12:29 PM)Dum-Dum Wrote: They should rev it till the limiter or till the power is obviously dropping off, not plateauing like yours. Is it definitely in BHP and not KW as those figures are poor for a car that you appear to of thought was OK. 138kw is 185bhp
Yeah it's definitely bhp. In my mind that car drives fine same as the diablo '6 I just sold. But then again I've never really given either of them much of a hoon.
It's been suggested it's either the cam timing or lambda so gonna have to get it booked in @ a garage to have a look. Would a run of the mill garage know what they're looking for re: cam timing etc or is this a specialist thing?
CLUB RALLYE
||AVO Race GTX Coilovers||Signature Blue Steels||P1 VTS Rack||Hybrid ARB||21mm Torsion Bar||rich_w Flywheel||
Posts: 19,854
Threads: 581
Joined: Dec 2011
Reputation:
195
Location: Bournemouth
Car Model/Spec: Supercharged 306 GTi6
Thanks: 36
Given 82 thank(s) in 78 post(s)
Cam timing is easy to check your self. Belt cover off, pin up the cams and crank pulley and if all the pins drop in nicely, its timed correctly. If not, somethings not right!
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Posts: 1,791
Threads: 19
Joined: Jun 2012
Reputation:
12
Location: Devonshire
Car Model/Spec: Peugeot 309 GRD(T)
Thanks: 4
Given 25 thank(s) in 24 post(s)
Nice to meet you yesterday, shame on the power output on the rallye, but it is a very tidy example.
Place my bets on a sensor or something not 100%
|