Puglove's supercharged 6, Repaint

[puglove]

Yeah i had to remove a few things to get it in lol, also battery tray isnt fixed down atm as iv removed somthing else too

[Grant]

also battery tray isnt fixed down atm as iv removed somthing else too

Oh really? It doesn't notice

[Piggy]

Remove that sissy box called the ABS and you'll have
tonnes of room.
This bedded in yet for more boost?

[puglove]

If you call 50miles bedded in ...........

[puglove]

All back together again

[7057sam]

Looks lovely mate

Makes me miss mine

What happened to the k&N which comes with the kit?

[puglove]

It was shit........ it was real tight and i tryed twisting it on and the filter just twisted up. besides it looked pants compared to this one

[Midnightclub]

So have you driven it off your drive yet or is it still hiding in the garage?

[devils_fuel]

^^^ lol

[puglove]

So have you driven it off your drive yet or is it still hiding in the garage?

yeah been out in it quite a few times, just keep changing stuff about lol

[puglove]

Not much of an update,

The old bumper was a right state stone chipped , cracked , scuffed , it was really showing its age, so before fcs it was time to do something about it,

I bought another bumper a load of spray kit and got cracking......... and took bog all pics lol

I also needed some extra cooling

[attachment=17196]

[attachment=17195]

[attachment=17197]

[attachment=17198]

[attachment=17199]

[Midnightclub]

Fair play that looks sweet mate..

[Piggy]

Nice...I didnt realise it was a fresh bumper...

Need to sort that wing ding now! Then it be mint!

I do lurrrrrv this car. Probably my favourite 306

[puglove]

yerp its a minty fresh one, the quarter is next on the list but going to pay a shop to do it i think

[Piggy]

Shame didnt see it on track...

You even done the bedding in mileage?

[puglove]

nop........ & it will be in bits again tomorrow lol

[Midnightclub]

standard.

[puglove]

Its the CV eatting monster atm lol

[puglove]

Been out in the garage today ............ and i remembered to take pics for once!!

so 1st up was fitting the metal monkey dials that iv owned for over a year!! also updated it to a ph3 surround and ph3 white needles
[attachment=17214]

[attachment=17215]

[attachment=17216]

Next up was fitting all my Dials, who needs a radio in a BECAUSEracecar any way?? lol, I also updated the console to a later brushed ally type but...... i cant find the heaters

[attachment=17217]

This started with cutting up a old number plate........ then forgetting to take pics again lol

[attachment=17218]

[attachment=17219]

Then we jump forward abit

[attachment=17220]

[attachment=17221]

[attachment=17222]

[attachment=17223]

Started getting the wirering together in my new cool braided sleeve, also found an unused bung under the MC that was perfect for this

---

Like so

[attachment=17224]

[attachment=17225]

[attachment=17226]

[ozonehostile]

Love the new dials dude, been meaning to do the same but haven't got around to butchering the set of ph3 clocks I've got on the parts pile lol

What gauges you running? Boost, oil pressure and temperature?

[puglove]

Does the phase 2.75 have the ph2 dial & needles ? lol

I running 2 lots of oil temp, 1 for sump & the other for the supercharger circuit. oh & a boost

[ozonehostile]

Does the phase 2.75 have the ph2 dial & needles ? lol

I running 2 lots of oil temp, 1 for sump & the other for the supercharger circuit. oh & a boost

Yeah, ph3 interior yet ph2 clocks haha

driven it to see what sort of temps the charger runs at?

[Eeyore]

That bung near the MC is what the derv boys use for their boost gauges. its very handy!

Looks like some good work there mate. you know you can buy the gauge holders right?

http://www.ebay.co.uk/itm/TRIPLE-GAUGE-D...564e32b5c4

[puglove]

No i havnt totally finished the wirering yet, & waiting on a fitting for the take off.

---

That bung near the MC is what the derv boys use for their boost gauges. its very handy!

Looks like some good work there mate. you know you can buy the gauge holders right?

http://www.ebay.co.uk/itm/TRIPLE-GAUGE-D...564e32b5c4

Iv never notice it before, iv always used the rubber bung in the passenger foot well.

& yes i know you can get them but i dont like the way they step in, i wanted a nice flat one that was a nice fit in the 306 surround plus the cost me exactly £0.00

[Mrs puglove]

The photo with your banner in the background looks really weird lol

I so want your car

[Piggy]

Did I miss the dyno run??

[Dum-Dum]

dyno? I must of missed that too?

I suppose the 6 would have to leave the garage for that.

[ginge191]

Was about to say; is one thing bolting up a SC, it's another having it running properly?

[procta]

coming on really, really well! i found k&n made more noise than anything really, as i had one on the rover. Panel filter that was too. ( kept the bay OEM)

[ozonehostile]

What colour back lighting you go for on the dials dude?

Look great, very nice and oem