Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Changing doors from PH2 -> PH3
#1
If everything goes to plan all of my doors will be swapped over for various reasons.

But was just wondering, how easy is it to change the doors over?

Also, the new doors have electric wing mirrors so will they just plug and play effectively?

Thank you Big Grin
[Image: 306ocsig_edited-1-1.jpg]


306 HDI, soon to be XUD
#2
just a thought, diablo changes massivly from car to car and especially from phase to phase
[Image: IMG_20130925_181339_zps95df48fa.jpg]
#3
Yeah i no, but the paint seems exactly the same as the front bumper looks no different
[Image: 306ocsig_edited-1-1.jpg]


306 HDI, soon to be XUD
#4
yeh the bumper seemed to match decs car very well. I think with the mirrors we will just have to see if they work once we have the doors on. If they dont then we can just put your manual ones back on but with the colour coded trims Smile
#5
youll need the switch to go in the door card too atleast
[Image: IMG_20130925_181339_zps95df48fa.jpg]
#6
SRowell Wrote:yeh the bumper seemed to match decs car very well. I think with the mirrors we will just have to see if they work once we have the doors on. If they dont then we can just put your manual ones back on but with the colour coded trims Smile


Sounds like a plan batman :kim:
[Image: 306ocsig_edited-1-1.jpg]


306 HDI, soon to be XUD
#7
4WayDiablo Wrote:youll need the switch to go in the door card too atleast

And im keeping the door card already in the ph3 doors
[Image: 306ocsig_edited-1-1.jpg]


306 HDI, soon to be XUD
#8
Should work then, im not entirely sure how theyre wired but the only thing i can think of is power?
[Image: IMG_20130925_181339_zps95df48fa.jpg]
#9
4WayDiablo Wrote:Should work then, im not entirely sure how theyre wired but the only thing i can think of is power?


This is what i was thinking, just thought i would ask to double check Smile
[Image: 306ocsig_edited-1-1.jpg]


306 HDI, soon to be XUD
#10
only one way to find out
although to be fair id just put the electric ones in, then use a blanking triangle thing on the inside, smartens it up and besides how often do you change your mirrors? and are you not able to wind the window down and poke it
[Image: IMG_20130925_181339_zps95df48fa.jpg]
#11
4WayDiablo Wrote:only one way to find out
although to be fair id just put the electric ones in, then use a blanking triangle thing on the inside, smartens it up and besides how often do you change your mirrors? and are you not able to wind the window down and poke it

Fair point lol

Also sam are the rear doors electric windows?
[Image: 306ocsig_edited-1-1.jpg]


306 HDI, soon to be XUD
#12
are your old door cards ok? im in need of some new ones
[Image: sig-1.jpg]

106 Xud9 Conversion GtiD (2nd Engine Rebuild)
SOLD

Dan! Wrote:Want me to blow this one up for you aswel?
#13
yeah they are all fine, standard black ones though
[Image: 306ocsig_edited-1-1.jpg]


306 HDI, soon to be XUD
#14
You should be able to use the electric mirrors. Pug did two looms. Low and high spec so as long as you have the high spec look you will be ok!
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
#15
Fingers crossed then Big Grin
[Image: 306ocsig_edited-1-1.jpg]


306 HDI, soon to be XUD
#16
yh mine the black ones, but the fabric has all come off and gone shite, lemme know how much ya want, now tryin to get a ph3 bumper with fogs £30 Big GrinBig Grin
[Image: sig-1.jpg]

106 Xud9 Conversion GtiD (2nd Engine Rebuild)
SOLD

Dan! Wrote:Want me to blow this one up for you aswel?
#17
tenner for them both mate? No real need for them lol
[Image: 306ocsig_edited-1-1.jpg]


306 HDI, soon to be XUD
#18
4WayDiablo Wrote:youll need the switch to go in the door card too atleast

Got everything we need from the 1.4 Wink
#19
SRowell Wrote:
4WayDiablo Wrote:youll need the switch to go in the door card too atleast

Got everything we need from the 1.4 Wink

Could probably do with an arch liner from it too lol. lol
#20
I completely forgot about that aha
[Image: 306ocsig_edited-1-1.jpg]


306 HDI, soon to be XUD
#21
declantg Wrote:I completely forgot about that aha

Lol, I also randomly remembered last week, that you're missing the front liner bit (under the washer bottle) but that wasn't there before anyway....and also we didn't remove that last bumper tab from the middle underneath so thats probably still there now lol.
#22
i managed to snap it off when i parked the other day! i heard a massive snap and it was gone lol

That other bits in my boot Smile
[Image: 306ocsig_edited-1-1.jpg]


306 HDI, soon to be XUD
#23
declantg Wrote:i managed to snap it off when i parked the other day! i heard a massive snap and it was gone lol

That other bits in my boot Smile

ill add the arch liner to your tab! lmao
#24
My tab with you is getting bad lol
[Image: 306ocsig_edited-1-1.jpg]


306 HDI, soon to be XUD
#25
declantg Wrote:My tab with you is getting bad lol

lucky there isnt particularly a time to settle up! lol
#26
thank god for that! How much is it for now? i have lost count lol
[Image: 306ocsig_edited-1-1.jpg]


306 HDI, soon to be XUD


Forum Jump:


Users browsing this thread: 1 Guest(s)