Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Engine mounts - HELP!
#1
Think my engine mounts are on their way out, symptoms are; knocking at low speed (thought this was ball joints and antiroll bar bushes, changed them and problem still occurs), there's lots of movement in the gear stick when in gear and any speed (vibrates considerably), knocking when changing gear which I thought could possibly be clutch but unsure and I can feel vibrations through the accelerator pedal at 40mph+

any help would be appreciated guys!
1.9 diesel Phase 2 - scrapped
1.8 meridian Phase 3 - going strong!
#2
get a bar in by the side of the mount and give it a lever, you should be able to tell . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
#3
i have a similar problem, i will check the engine mount drivers side also..
#4
check for worn driveshafts too, see if there is any play in them - can cause the gearstick to bounce around
#5
Anyone get to the bottom of this? ...Doubt he'll be back
[Image: 9fa12c59-0c3d-4413-968d-6a7840ff068f.jpg]
Stage 1 HDi DTurbo Diablo 5dr, "Dee-Dee"
#6
(12-05-2015, 08:24 PM)highwayman306 Wrote: Anyone get to the bottom of this? ...Doubt he'll be back

He was online 9hrs ago Tongue
#7
(20-04-2014, 10:54 AM)zx_volcane Wrote: check for worn driveshafts too, see if there is any play in them - can cause the gearstick to bounce around
I suggest checking this.
I had similar problem, I changed every engine mount as well.
#2 Moonstone Blue HDI
[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]


Possibly Related Threads…
Thread Author Replies Views Last Post
  Engine mounts mackat 0 1,545 25-11-2014, 09:50 PM
Last Post: mackat
  Engine mounts ginge191 5 3,285 18-06-2014, 09:49 PM
Last Post: cully
  engine mounts ripp444 3 2,307 29-03-2014, 10:57 PM
Last Post: miles

Forum Jump:


Users browsing this thread: 1 Guest(s)