Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rear Axle
#1
Anyone know where I can get a second hand Rear axle for a 2000 2.0 hdi estate 306? Had a look on ebay theres a few but to be honest they look like they've had a hard life.
#2
I have a disk beam for sale
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
#3
Got a picture? something isnt right with my axle, the passenger side rear wheel leans inward at the top. Its as though someone has smashed it with a sledge hammer or something. I dont think it would pass the mot and its going to wear the tyre down.
#4
Unless you buy a fully reconditioned and rebuilt one they're all going to look as though they have been under a car on salty roads for ~15 years.
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.

62k Diablo Phase 1 Gti-6:
Project Thread
#5
just in case you don't know, any 306 axle will fit, hatch, sedan, cab . .etc . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
#6
Is it worth buying a recon one do you think? You can pick one up from ebay for around the 80ish mark.
#7
(23-02-2014, 11:27 AM)LewisG Wrote: Is it worth buying a recon one do you think? You can pick one up from ebay for around the 80ish mark.

you can't get a recon axle for £80 . . .if you can i'd like to see it lol . . .recon ones are usually about £300-400 . .try and find a low mileage one is my advice . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
#8
(23-02-2014, 11:19 AM)LewisG Wrote: Got a picture? something isnt right with my axle, the passenger side rear wheel leans inward at the top. Its as though someone has smashed it with a sledge hammer or something. I dont think it would pass the mot and its going to wear the tyre down.

Look at my forsale thread
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
#9
The rebuild kit is £100 alone so I doubt you'll get a recon beam for that lol!

Maybe rebuild one yourself?
#10
No a recon one cheapest I can find is £240 I meant £80ish for a secondhand one sorry lol
#11
Come take mine want rid of it
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
#12
(23-02-2014, 11:57 AM)karl1989 Wrote: Come take mine want rid of it

Will it fit my car? 2000 reg 2.0 hdi estate 306.
#13
Ye mate straight fit
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
#14
(23-02-2014, 12:02 PM)karl1989 Wrote: Ye mate straight fit

Tried to find the picture but cant find it pal. Is it in good condition? It cant have any damage what so ever.
#15
http://306oc.co.uk/forum/thread-20639.html

Haven't had a proper go over at it but there was no bangs wen I towed it. It is lowerd though
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
#16
You willing to arrange courier paid at my expense obviously.
#17
Finding a courier to get it mate it is heavy. Are you in Rotherham?
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
#18
Different lad Karl
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
#19
Can you have a good look at it mate please. It being lowered will it make any difference? Mines not lowered. Im in colchester, Essex
#20
Be more bumpy and have to slow right down for speed humps. We're you from?

(23-02-2014, 12:16 PM)Danny2009 Wrote: Different lad Karl

Just noticed lol
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
#21
(23-02-2014, 12:18 PM)karl1989 Wrote: Be more bumpy and have to slow right down for speed humps. We're you from?

(23-02-2014, 12:16 PM)Danny2009 Wrote: Different lad Karl

Just noticed lol

Colchester in Essex
#22
I've got one here. I bought it off Tom306 and it was fitted to the estate he had last year. If you drive over here I can help you fit it one of the weekends if you like?
#23
(23-02-2014, 12:39 PM)DeeTurbo Wrote: I've got one here. I bought it off Tom306 and it was fitted to the estate he had last year. If you drive over here I can help you fit it one of the weekends if you like?

The complete axel?
#24
(23-02-2014, 12:39 PM)DeeTurbo Wrote: I've got one here. I bought it off Tom306 and it was fitted to the estate he had last year. If you drive over here I can help you fit it one of the weekends if you like?

Its got no camber right?
#25
No camber, but the calipers could do with a refurb. Could always use the ones off your car.
#26
(23-02-2014, 01:42 PM)DeeTurbo Wrote: No camber, but the calipers could do with a refurb. Could always use the ones off your car.

I will probably use the ones off my car. Aslong as there isnt any camber ill have it, How much do you want?
#27
Hi lewis. Please can you arrange sales via PM? Its more likely that DeeTurbo will see your question then Smile
#28
(23-02-2014, 07:12 PM)SRowell Wrote: Hi lewis. Please can you arrange sales via PM? Its more likely that DeeTurbo will see your question then Smile

No Problem Smile
#29
(23-02-2014, 11:24 AM)Mattcheese31 Wrote: just in case you don't know, any 306 axle will fit, hatch, sedan, cab . .etc . .Smile

That's worth knowing.
#30
(23-02-2014, 07:52 PM)Alex Wrote:
(23-02-2014, 11:24 AM)Mattcheese31 Wrote: just in case you don't know, any 306 axle will fit, hatch, sedan, cab . .etc . .Smile

That's worth knowing.

They will fit but of course you still need to check the new axle because if you had a ph3 gti6/hdi etc, then the last thing you want is a ph1 axle with drum brakes and no ABS Smile
[Image: 65613_10200761612710317_1548698655_n_zps68c27004.jpg]

CONVOI EXCEPTIONNEL


Possibly Related Threads…
Thread Author Replies Views Last Post
  Rear stub axle sizes weka 2 3,979 26-04-2019, 06:18 PM
Last Post: weka
  rear axle joe67 4 5,046 25-04-2018, 08:38 PM
Last Post: carlukepeugeot
  rear axle beam tube quality dsm482 10 8,164 22-12-2017, 02:01 AM
Last Post: dsm482

Forum Jump:


Users browsing this thread: 1 Guest(s)