Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Poor headlight output
#1
Hi.
Due to work hours, I am spending most of the time driving in the dark down rural roads and finding the headlight to be poor especially if I have to switch to dip. Basically what upgrades is there out there from budget to expensive? They kept clean and output is still poor.

Cheers
#2
Osram Nightbreakers, amazing bulbs that make a huge difference, about £9 delivered off Amazon.
[Image: tapatalk_1427020983519_zpsnwvozlhb.jpeg]
#3
Osram night breakers
Phillips blue vision

Both good and a noticeable difference over stock ones.
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
#4
Another vote for Nightbreakers here, although ive not tried Blue vision yet. As Niall says, they are notably better than standard bulbs, im running 3 sets of them in mine....dipped, mains and the fogs. The fogs dont necessarily increase overall visibility, but they light up the ground just in front of the bumper better when coupled with the main bulbs.

/BecauseHighBeamFogFlashMod Wink
[Image: P1060836_zpsz3xgxt7q.jpg]
#5
HID's Wink
[Image: mcetg0.png]

ZR VVC Homebrew mapping project: http://306oc.co.uk/forum/showthread.php?tid=14360
#6
(13-01-2014, 09:55 PM)lolsteve Wrote: HID's Wink

You would say that in your Halfords edition Rover Wink
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
#7
Of course, also got some fuel magnets on route too and an electric supercharger
[Image: mcetg0.png]

ZR VVC Homebrew mapping project: http://306oc.co.uk/forum/showthread.php?tid=14360
#8
I'm considering banning anyone who has HIDs...
[Image: tapatalk_1427020983519_zpsnwvozlhb.jpeg]
#9
Do h7r bulbs count?
[Image: mcetg0.png]

ZR VVC Homebrew mapping project: http://306oc.co.uk/forum/showthread.php?tid=14360
#10
Im planing beating the next driver with a stick who blinds me with Hid's,
#11
I was close to going for HID's but thought id try these bulbs from halfords and they have made a massive difference wont be having to invest in hids anymore..

http://www.halfords.com/webapp/wcs/store...yId_165538
#12
£20 for 1 bulb?!?! Y u do dis?!

H4 bulbs PAIR - http://www.ebay.co.uk/itm/New-OSRAM-NIGH...2c77293ac4

H7 bulbs PAIR - http://www.ebay.co.uk/itm/2-x-Osram-Nigh...35ce43744c
[Image: P1060836_zpsz3xgxt7q.jpg]
#13
(13-01-2014, 10:30 PM)WiNgNuTz Wrote: £20 for 1 bulb?!?! Y u do dis?!

They are half price on trade which actually makes them quite good value Wink
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
#14
BOGOF , trade card might knock a bit off as well
[Image: mcetg0.png]

ZR VVC Homebrew mapping project: http://306oc.co.uk/forum/showthread.php?tid=14360
#15
Also improve the earthes

The 306 earthes were marginal when the car rolled off the production line , add ten years of degrading and they can cause all sorts of problems
#16
(13-01-2014, 10:31 PM)Niall Wrote:
(13-01-2014, 10:30 PM)WiNgNuTz Wrote: £20 for 1 bulb?!?! Y u do dis?!

They are half price on trade which actually makes them quite good value Wink

(13-01-2014, 10:31 PM)lolsteve Wrote: BOGOF , trade card might knock a bit off as well

Oh yes, so it is. Doh lol
[Image: P1060836_zpsz3xgxt7q.jpg]
#17
Didnt actually pay for them found them in the garage "cheers dad" Tongue
#18
(13-01-2014, 10:34 PM)swampy Wrote: Also improve the earthes

The 306 earthes were marginal when the car rolled off the production line , add ten years of degrading and they can cause all sorts of problems

id agree with this peugeot just bolted the earth tabs to the paint! remove them clean up the mateing surfaces and lots of things will work better Wink
#19
Get projector head lamps, THEN get HID's Wink
A moments silence please, for our brothers in the NAD-zone.
#20
(13-01-2014, 11:06 PM)Martin306 Wrote: Get projector head lamps, THEN get HID's Wink

Thats still not everything you need for legal HIDs.
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
#21
(13-01-2014, 11:08 PM)Niall Wrote:
(13-01-2014, 11:06 PM)Martin306 Wrote: Get projector head lamps, THEN get HID's Wink

Thats still not everything you need for legal HIDs.

Washers and level isn't required, there are cars out there from factory without either of those fitted. They're only tested if fitted.

Only required to have washers fitted in NI.
A moments silence please, for our brothers in the NAD-zone.
#22
I didn't want HID's as I was aware of the legalities of them. Halfords bulbs. I had them on my focus and my trade card will be used there. Interesting about the earth, but makes sense.
#23
I've got hid's, i think mine's got the projector lights, well it's a clear lens, then again i'm probably talking bollox....so far though, i've had no problem with other drivers flashing. I've just got a good white light, not the posey blue stuff
#24
(13-01-2014, 11:11 PM)Martin306 Wrote:
(13-01-2014, 11:08 PM)Niall Wrote:
(13-01-2014, 11:06 PM)Martin306 Wrote: Get projector head lamps, THEN get HID's Wink

Thats still not everything you need for legal HIDs.

Washers and level isn't required, there are cars out there from factory without either of those fitted. They're only tested if fitted.

Only required to have washers fitted in NI.


Passing an MOT does not mean that all modifications on the vehicle are definitely road legal.
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.

62k Diablo Phase 1 Gti-6:
Project Thread
#25
(13-01-2014, 10:28 PM)Moh Wrote: I was close to going for HID's but thought id try these bulbs from halfords and they have made a massive difference wont be having to invest in hids anymore..
http://www.halfords.com/webapp/wcs/store...yId_165538

These are utter pish, stuck them in one side - no notable difference from standard osram bulbs - took them straight back for a refund.

Night breakers on the other hand ...
#26
HID's are wank im removing mine this evening
00' 106 Indy - Moonstone - Sold
97' 106 XT 1.6 - Mayerling Green - Swapped
95' 306 P1 DT - Onyx - Scrapped
97' 306 P2 DT - Silver - Scrapped
97' 306 P2 DT - Onyx - SORN awaiting scrap
#27
You must have a duff set, mine are fine


Forum Jump:


Users browsing this thread: 1 Guest(s)