Posts: 6,482
Threads: 226
Joined: Dec 2011
Reputation:
24
Location: Cornwall
Car Model/Spec: A3 TDi
Misleading thread title gigiddy :p
Right i plan on building up my 11mm pump tomorrow, i have already stripped the transit pump down so i know what to expect, gave me a chance to break shit and make a mess etc. I just wanted to know if theres any bits i need to be particularly careful with? Any bits that are easier done this way than that? And more importantly any mods i could do whilst its completely apart? Im doing a full reseal aswell not just putting the 11mm head on. So yeah any hints tips etc would be a great help 
Doesnt even own a 306.
Posts: 3,342
Threads: 151
Joined: Dec 2011
Reputation:
14
Location: Rotherham
Car Model/Spec: 306 D-turbo
Never done one but make sure you out the cam plate in the right way or timing will be out
Other than that good luck
![[Image: image_zps45f2003b.jpg]](http://i39.photobucket.com/albums/e174/austinmini-2008/image_zps45f2003b.jpg)
Team Doesn't own a 306
Posts: 4,660
Threads: 343
Joined: Jul 2012
Reputation:
15
Location: Chesterfield
Car Model/Spec: 106 gti / 306 hdi estate
Good luck....... That is all 
Posts: 500
Threads: 19
Joined: Sep 2013
Reputation:
3
Location: Seaton, devon
Car Model/Spec: Ph1 black dturbo
camplate seems to be the most common f*ck up ive seen on here haha 
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Gov mod
And thats the cradle people break!
Posts: 1,345
Threads: 119
Joined: Jan 2012
Reputation:
15
Location: Rotherham/Sheffield
Car Model/Spec: Ph1 Diablo DT
Where the woodruff key recess is that's the Marks every locator should be on then you won't have it out 180
Perv 106 1.4 xs First Pug Love - Scrapped
Perv 306 1.6 5 Door Hore - Sold
110bhp 207 Hdi Sport - Used as a Brake
173bhp T25 Ph1 Diablo Dturbo - Scrapped
Thirsty Bitch Volvo 850 Estate - Sold
51bhp Berlingo Nad DT Van - Sold
Slow as f*ck Dispatch Work Horse
www.prestige-auto-care.co.uk
Posts: 6,482
Threads: 226
Joined: Dec 2011
Reputation:
24
Location: Cornwall
Car Model/Spec: A3 TDi
Posts: 1,926
Threads: 86
Joined: Dec 2011
Reputation:
2
Posts: 8,026
Threads: 376
Joined: Dec 2011
Reputation:
38
Location: Kent
Car Model/Spec: Phase 1 GTI 6
where's that spacer missing from!? 
Phaes 1 GTI 6 - Onyx Black
Posts: 6,482
Threads: 226
Joined: Dec 2011
Reputation:
24
Location: Cornwall
Car Model/Spec: A3 TDi
Not on yet, only just finished putting it together, want to get it checked before i stick it on, then it'll be new cambelt and tensioners and pump all at once. Its just an old o ring not a spacer, had me worried for a bit!
Doesnt even own a 306.
Posts: 8,026
Threads: 376
Joined: Dec 2011
Reputation:
38
Location: Kent
Car Model/Spec: Phase 1 GTI 6
(11-01-2014, 05:23 PM)Tom Wrote: Its just an old o ring not a spacer, had me worried for a bit!
imagine. Back to square one; shit!
Saw the picture of it in pieces; looked a hell of a job! credit 
Phaes 1 GTI 6 - Onyx Black
Posts: 6,482
Threads: 226
Joined: Dec 2011
Reputation:
24
Location: Cornwall
Car Model/Spec: A3 TDi
(11-01-2014, 05:44 PM)ginge191 Wrote: (11-01-2014, 05:23 PM)Tom Wrote: Its just an old o ring not a spacer, had me worried for a bit!
imagine. Back to square one; shit!
Saw the picture of it in pieces; looked a hell of a job! credit
Thank you sir, its not that bad really (now i've said that it probably wont work)
Disassembled pic just for reference/help someone out/whatever.
![[Image: IMG_20140110_200233_zps1ab6f854.jpg]](http://i817.photobucket.com/albums/zz92/tomw1123/IMG_20140110_200233_zps1ab6f854.jpg)
Doesnt even own a 306.
Posts: 199
Threads: 16
Joined: Mar 2013
Reputation:
0
Location: Meath
Car Model/Spec: 406TD/XUD Corolla/lolvan
Posts: 4,660
Threads: 343
Joined: Jul 2012
Reputation:
15
Location: Chesterfield
Car Model/Spec: 106 gti / 306 hdi estate
But will it run???  done well tho hate fiddly jobs that's why Jenks is building mine lol
Posts: 6,482
Threads: 226
Joined: Dec 2011
Reputation:
24
Location: Cornwall
Car Model/Spec: A3 TDi
Shimmed the gov right up, got a sore thumb from squeezing it all up!
Doesnt even own a 306.
Posts: 731
Threads: 35
Joined: Feb 2013
Reputation:
7
Location: Devon
Car Model/Spec: Phase 1 dturbo sima blue
Sore thumb good old gov mod
Posts: 571
Threads: 19
Joined: Dec 2011
Reputation:
5
Location: Cavan, Ireland
Car Model/Spec: Ph1 D-turbo(on going project)
I might be getting a dturbo in for breaking soon, would have engine and all, im up in cavan though..
Posts: 5,902
Threads: 142
Joined: Dec 2011
Reputation:
58
Location: Hastings, East Sussex
Car Model/Spec: E46 BMW 320d
(11-01-2014, 05:51 PM)Tom Wrote: Thank you sir, its not that bad really (now i've said that it probably wont work)
Disassembled pic just for reference/help someone out/whatever.
Thats fantastic, i may end up referring to that pic when i finally get round to properly stripping my Bosch down and resealing it.
Posts: 6,482
Threads: 226
Joined: Dec 2011
Reputation:
24
Location: Cornwall
Car Model/Spec: A3 TDi
Make sure you got a decent torx bit set i had to go buy a new one cos i chewed up a cheapy, needle nose pliers and a smaller jewelers flat head screw driver for digging off o rings.
Doesnt even own a 306.
Posts: 5,902
Threads: 142
Joined: Dec 2011
Reputation:
58
Location: Hastings, East Sussex
Car Model/Spec: E46 BMW 320d
Lol, well i have access to numerous torx bit sets, probably all as cheap as each other, but whatever. Also got a precision screwdriver set, so that should be useful for the o rings.
Posts: 6,482
Threads: 226
Joined: Dec 2011
Reputation:
24
Location: Cornwall
Car Model/Spec: A3 TDi
You should be ok then :p
Doesnt even own a 306.
Posts: 4,608
Threads: 90
Joined: Dec 2011
Reputation:
54
Location: Cornwall
Car Model/Spec: 1996 306 DT M-TDI/16
Tom did you keep everything lubed as you assembled? And did you fil it with derv before you put the top back on? Only say because if you build them dry the vanes will literally stick within days..!
Looking good though, could have at least fully cleaned the casing though while it was apart!!
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |
![[Image: sigi-2.png]](http://i281.photobucket.com/albums/kk226/darrenjlobb/sigi-2.png)
Posts: 6,482
Threads: 226
Joined: Dec 2011
Reputation:
24
Location: Cornwall
Car Model/Spec: A3 TDi
Built dry filled with derv day and a bit after...
Doesnt even own a 306.
|
![[Image: image_zps45f2003b.jpg]](http://s39.photobucket.com/user/austinmini-2008/media/image_zps45f2003b.jpg.html)
![[Image: 00000000-0000-0000-0000-00000000014E_zpsprynorkl.jpg]](http://s873.photobucket.com/user/craigus123/media/00000000-0000-0000-0000-00000000014E_zpsprynorkl.jpg.html)
![[Image: IMG_20140111_141108_zpswffvf9mt.jpg]](http://s817.photobucket.com/user/tomw1123/media/Mobile%20Uploads/IMG_20140111_141108_zpswffvf9mt.jpg.html)
![[Image: IMG_20140111_141104_zpstlyu1sjt.jpg]](http://s817.photobucket.com/user/tomw1123/media/Mobile%20Uploads/IMG_20140111_141104_zpstlyu1sjt.jpg.html)
![[Image: IMG_20140111_163309_zpssnxciond.jpg]](http://s817.photobucket.com/user/tomw1123/media/Mobile%20Uploads/IMG_20140111_163309_zpssnxciond.jpg.html)
![[Image: Untitled-1_zpsc57da38e.jpg]](http://s112.photobucket.com/user/w1n_2006/media/Untitled-1_zpsc57da38e.jpg.html)
![[Image: IMG_20140110_200233_zps1ab6f854.jpg]](http://s817.photobucket.com/user/tomw1123/media/IMG_20140110_200233_zps1ab6f854.jpg.html)
![[Image: Image423_zps1ac08bc4-1_zps15c76431.jpg]](http://i1225.photobucket.com/albums/ee388/humbrol/Image423_zps1ac08bc4-1_zps15c76431.jpg)
![[Image: mike_sig_zpsd438fb98.jpg]](http://s307.photobucket.com/user/rallymark1/media/306oc%20Forum/mike_sig_zpsd438fb98.jpg.html)
![[Image: P1060836_zpsz3xgxt7q.jpg]](http://i1101.photobucket.com/albums/g427/wingnutz2/P1060836_zpsz3xgxt7q.jpg)