HDI box on xud how to check Hdi box is ok

[Chris_90]

Looking at a Hdi some time this week for the 205, but can I check it is ok off the car? Don't wanna buy a naffed one.

How do I check it?

Thanks in advance

[Danny2009]

Wouldn't bother there wank

[zx_volcane]

Can't really check it off the car, I'm sure it'll be ok

Paired up with a gt20 + weight of a 205 I'd say it'd be quite a good combination.

[Chris_90]

Wouldn't bother there wank

Not sure about that lol but every one has there opinions

Can't really check it off the car, I'm sure it'll be ok

Paired up with a gt20 + weight of a 205 I'd say it'd be quite a good combination.

No way to check the gear selectors? Any thing like that?

It's more the small wheels on a 205 makeing the gear ratios smaller, Hdi box will help with that with the longer ratios, if that make sense hard to explain but I no what I mean

[Anton]

Chris what size tyres are you running?

[Chris_90]

Chris what size tyres are you running?

Couldn't tell you tbh 14's I no that but can check tomorrow, only got car today so not clued up on it all yet

[Anton]

Let us know, can work out the speed differences

[Chris_90]

I would guess at 55/60 profile being the 205

[Danny2009]

Everyone rants and raves about them I fitted one and went back to a xud box but each to their own

[Piggy]

I dont see the point with a xud9 in a 306...

but for a lighter/smaller car or for the xud11 I think its great

[Tom]

Wheel size makes over 1000rpm difference when cruising at 70? I'm using an xud box now and I'm still at 4krpm when cruising at 80mph :/

[Anton]

^^^ lol im doing about 120mph at 4k

[Tom]

I want that

[Piggy]

at 70 mines like ticking over

[Anton]

Nah its hardly comfortable in a ZX let alone a 205!

[Piggy]

yeah...lol...120+ in tin box must be scarely as hell

[Tom]

So why is my gearing so weird? It used to be about 2750rpm in the 306 at 70 :/

[Anton]

Tyre size?

[Chris_90]

Wheel size makes over 1000rpm difference when cruising at 70? I'm using an xud box now and I'm still at 4krpm when cruising at 80mph :/

^^^^ that's why I wanna put one on lol plus in a "tin can" I'm sure it will be capable of maxing out so 120mph sounds fun all tho it will never go above 70 of course

[Tom]

I'm running 14s 175 65 14... They're not much of a different size to 195 50 15 :/

[Chris_90]

The 205 is running 165/60/14 tyres at the min if you can work that out anton?

[Dave]

Hdi box all the way

[Chris_90]

On the subject of gearbox any one got some ideas on how I can get the pin out the clutch arm, it will tap in but just carnt get enough grip to pull it out

[Tom]

Moleys? Hammer and chisel lol

[Chris_90]

Moleys? Hammer and chisel lol

Tried both

Tom yours is running a td04 int it?

Any issues with gear linkages near/hitting turbo?

[Tom]

When I go into reverse the linkage is like a nats dick away from the downpipe plate. But then I am using 10mm plate!

Get a bite in with the chisel then at a bit of an angle aiming outwards and twat it again.

[Anton]

http://www.willtheyfit.com/index.php?wid...18#content

[Chris_90]

http://www.willtheyfit.com/index.php?wid...18#content

So with that then at 60mph I will actually be doing 55mph?

[mr_fish]

On my hdi box the speedo was 10mph out, so when at 60mph on the dash...actually 50mph. Changed the speedo drive cog to an XUD one and that corrected it. Just saying something to maybe look at.

[Chris_90]

On my hdi box the speedo was 10mph out, so when at 60mph on the dash...actually 50mph. Changed the speedo drive cog to an XUD one and that corrected it. Just saying something to maybe look at.

I was thinking this tbh, i remember seeing some one have issue with speedo not reading right, is it easy to swap?