Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Epic headgasket failure.... Round 2!
#1
On Friday night me and pugmarshall picked up a bargain 205, only 15 miles from my house with 3 months tax and mot

1995 Peugeot 205 mardi gras 1.8d (nad) in miami blue with the nice Nad bosch pump

Really tidy car except for a red bootlid that the previous owner put on to replace the dented original, and a small scratch on the side where someone has walked past with a belt buckle or something

[Image: 20131109_143733_zpsc53ab150.jpg]

The Nad engine lasted for an hour of our abuse before this happened:

[Image: 20131109_173725_zps2c4ff897.jpg][video=youtube]http:// https://www.youtube.com/watch?v=y9YuZ_Je...ata_player[/video]


Lololol

Never seen pressurisation like it haha


Nothing for it but to drop in a chronic boost xud9 now ninja
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
#2
"This video is private" Nice one douchebag! Tongue
[Image: Ty8kl7b.jpg]
#3
(11-11-2013, 02:54 PM)Midnightclub Wrote: "This video is private" Nice one douchebag! Tongue

My bad, should be sorted now haha
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
#4
hahaha
#5
well looks like a Dturbo lump is on the cards for that if I am right?
#6
ah bit of k seal and it'll be rite
#7
Put some more water in last night, seems alright haha
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
#8
2.1 it Wink



#9
(12-11-2013, 08:26 AM)Chris_90 Wrote: 2.1 it Wink

It's possible because there's a couple of xud11 205s in Holland, not sure how much custom work would need to be put in though, things are already getting tight in some areas putting an xud9te in
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
#10
1.6 HDi it.
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
#11
V8 it.
[Image: MIRKxNP.jpg]
#12
Been contemplating an mi16 or maybe Tu5jp4 like the rallye. But that's effort when an xud will drop straight in no worries. Going to sort out the body and chassis first then leave the Bay empty for whatever, already got a car full of 205 parts haha
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
#13
(12-11-2013, 12:49 PM)silverzx Wrote: 1.6 HDi it.

That is 1 of the worst engines ever made!
#14
(12-11-2013, 01:25 PM)Frosty Wrote:
(12-11-2013, 12:49 PM)silverzx Wrote: 1.6 HDi it.

That is 1 of the worst engines ever made!

Is it? I know nothing about them! Big Grin
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
#15
They aren't bad engines provided you service them properly.. and regularly and can make pretty crazy power
[Image: Ty8kl7b.jpg]
#16
Ok so it needs a new engine for the powerrrrrrrrrrrrrr and there are some good suggestions but what about........... A......... 13b mazda engine....... Oh and rwd?

#whythehellnot
when in doubt...... flat out.
#17
Er no.. Tongue
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
#18
when in doubt...... flat out.
#19
(12-11-2013, 01:25 PM)Frosty Wrote:
(12-11-2013, 12:49 PM)silverzx Wrote: 1.6 HDi it.

That is 1 of the worst engines ever made!
Only problem I know of is the turbo lines get blocked(?) and kill the turbo
what else is wrong with them?
[Image: mcetg0.png]

ZR VVC Homebrew mapping project: http://306oc.co.uk/forum/showthread.php?tid=14360
#20
Dual mass flywheel puts me off
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
#21
(12-11-2013, 02:56 PM)lolsteve Wrote:
(12-11-2013, 01:25 PM)Frosty Wrote:
(12-11-2013, 12:49 PM)silverzx Wrote: 1.6 HDi it.

That is 1 of the worst engines ever made!
Only problem I know of is the turbo lines get blocked(?) and kill the turbo
what else is wrong with them?

I think Frosty only said it because he keeps tripping over one at his work Tongue

They are a delicate engine when it comes to what type of oil is used in them. Also suffer with DMF and DPF but I'm sure their must be a solid flywheel conversion around and someone to map the DPF & EGR out.
#22
(12-11-2013, 03:11 PM)mr_fish Wrote:
(12-11-2013, 02:56 PM)lolsteve Wrote:
(12-11-2013, 01:25 PM)Frosty Wrote: That is 1 of the worst engines ever made!
Only problem I know of is the turbo lines get blocked(?) and kill the turbo
what else is wrong with them?

I think Frosty only said it because he keeps tripping over one at his work Tongue

They are a delicate engine when it comes to what type of oil is used in them. Also suffer with DMF and DPF but I'm sure their must be a solid flywheel conversion around and someone to map the DPF & EGR out.

Lol and injector seals blowing
#23
They're a great engine plauged by so many issues.

They f*ck injector seals, then you can't get the injectors out the head, scrapping the engine.

They only take a CERTAIN type of oil (lowSAP) otherwise they'll block the turbo feeds, killing the turbo.

Some are DMF - but there's a SMF conversion kit available.

Some have a DPF - but easily mapped out.
(16-05-2016, 10:45 AM)Toms306 Wrote: Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in. Wink
Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
#24
These Nad engines are tough little bastards, after the other night it's just taken another 3 hours of engine torture, everything you can do to try killing an engine has been tried, burnouts, redline torture, hooning with no coolant, donuts, j turns, running on engine oil..... We even filled up the rad with coke at one point to see what would happen haha
A can of hairspray down the inlet developed a loud knock but it still runs, it was going for an hour with no coolant whatsoever haha

This is how hot it was haha
[video=youtube]http:// https://www.youtube.com/watch?v=0q86mM_K...ata_player[/video]
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
#25
(16-11-2013, 08:22 AM)ozonehostile Wrote: These Nad engines are tough little bastards, after the other night it's just taken another 3 hours of engine torture, everything you can do to try killing an engine has been tried, burnouts, redline torture, hooning with no coolant, donuts, j turns, running on engine oil..... We even filled up the rad with coke at one point to see what would happen haha
A can of hairspray down the inlet developed a loud knock but it still runs, it was going for an hour with no coolant whatsoever haha

This is how hot it was haha
[video=youtube]http:// https://www.youtube.com/watch?v=0q86mM_K...ata_player[/video]

Your a sick b@stard!! Nospeak
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
#26
Need an excuse to replace the engine with a turbo diesel but the Nad just won't die haha
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
#27
(16-11-2013, 10:49 AM)ozonehostile Wrote: Need an excuse to replace the engine with a turbo diesel but the Nad just won't die haha

Strap a TD04 on her then!
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
#28
Hows it still going?? Haha
[Image: 00000000-0000-0000-0000-00000000014E_zpsprynorkl.jpg]
#29
Could of fried some eggs off that engine.

Oh and was the video time done on purpose? 2:05 Smile
#30
I own half of this car, therefore, no petrol shite will go near it. Smile


Possibly Related Threads…
Thread Author Replies Views Last Post
  MOT failure rocker8742 26 14,000 29-10-2013, 04:15 PM
Last Post: Rippthrough
  MOT failure :-( dec-66 4 3,647 20-06-2012, 06:05 PM
Last Post: samass
  Guess the Hire Car - Round 2 Scott 52 21,000 05-04-2012, 10:15 PM
Last Post: Toms306

Forum Jump:


Users browsing this thread: 1 Guest(s)