Posts: 9
Threads: 1
Joined: Aug 2012
Hi gang, fairly new to this. I have a phase 3 306 hdi mainly standard apart from de-cat, de egr and K&N panel filter.
Apologies for starting with a problem, but I am stumped. To cut a long story short, I have lost power to the ignition, its not cranking , no dash lights nothing. The headlights and hazards, central locking etc still work, and the starter spins if wired directly to the battery. I have visually checked all the fuses, and cleaned the main earths (gearbox/chassis) and recharged the battery, but still not a sausage.
Any ideas would be greatly appreciated.
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
which fuses have you checked?
there are some mega ones in the engine bay!
welcome!
Posts: 9
Threads: 1
Joined: Aug 2012
Cheers, I had a look at the big bad boys in the engine bay fuse box and all seem fine.
Posts: 8,749
Threads: 208
Joined: Jan 2012
Reputation:
60
Location: Wiltshire
Car Model/Spec: ph2 Gti6 / ph4 HDI Estate
have you taken them right out a looked properly (under the bonnet)
![[Image: DSC_0190-Copy_zpsf093f84d.jpg]](http://i1038.photobucket.com/albums/a468/167gti8/DSC_0190-Copy_zpsf093f84d.jpg)
Member of 99% warning or your nothing club!
Posts: 5,847
Threads: 169
Joined: Dec 2011
Reputation:
91
Location: South London
Car Model/Spec: 2003 Jaguar S-Type Sport 3.0V6
Welcome along. What's the wiring condition like on the ingitiln barrel? Do the electrics work on ignition?
![[Image: car-1.jpg]](http://i1117.photobucket.com/albums/k591/grant-306/car-1.jpg)
Member of the 99% warning or you're nothing club
2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Posts: 9
Threads: 1
Joined: Aug 2012
Had them out and all appear fine ?
Posts: 9
Threads: 1
Joined: Aug 2012
(09-08-2013, 03:36 PM)Grant Wrote: Welcome along. What's the wiring condition like on the ingitiln barrel? Do the electrics work on ignition?
I replaced the barrel as the spring had gone. No electrics on ignition :-(
Posts: 9
Threads: 1
Joined: Aug 2012
09-08-2013, 08:08 PM
(This post was last modified: 09-08-2013, 08:10 PM by andyhobden.)
Update, I went out and tried to start her tonight, and bingo. Just dash lights on first turn of the key, turned off and on again and jackpot. Purring like a beauty. Que back flip and happy dancing. Left her running for a few minutes switched her off. Tried to switch her on again and sweet fanny Adams . Hooked up the booster pack, and bingo again. Could it just be that the battery has seen better days ? Can't use my multimeter at the. moment as the red lead managed to get boxed up with a mates snap on diag. Which was next to useless.
Posts: 5,494
Threads: 202
Joined: Dec 2011
Reputation:
58
Location: Eastleigh
Car Model/Spec: S16 and HDi daily
Worth trying a battery on it, but I wouldn't go and buy one unless you know it's the issue.
Welcome BTW!
Welding and fabrication projects undertaken, contact me for more information.
Posts: 9
Threads: 1
Joined: Aug 2012
(09-08-2013, 08:12 PM)Jonny81191 Wrote: Worth trying a battery on it, but I wouldn't go and buy one unless you know it's the issue.
Welcome BTW!
Thanks boss. Do you know if there is a seperate earth for the altinator ? And is it worth checking the earths on the inside ?
Posts: 5,494
Threads: 202
Joined: Dec 2011
Reputation:
58
Location: Eastleigh
Car Model/Spec: S16 and HDi daily
Alternator earths through the block.
Try this:
Connect a jump lead form the battery negative terminal to the gearbox or any part of the block. Then try starting it.
Welding and fabrication projects undertaken, contact me for more information.
Posts: 9
Threads: 1
Joined: Aug 2012
(09-08-2013, 08:29 PM)Jonny81191 Wrote: Alternator earths through the block.
Try this:
Connect a jump lead form the battery negative terminal to the gearbox or any part of the block. Then try starting it.
Will try in the morning. Thanks boss. I have to say you guys are a friendly bunch :-) I was worried that I would sound like a fool
Posts: 5,494
Threads: 202
Joined: Dec 2011
Reputation:
58
Location: Eastleigh
Car Model/Spec: S16 and HDi daily
(09-08-2013, 08:44 PM)andyhobden Wrote: I was worried that I would sound like a fool
You're in the right place then!
Welding and fabrication projects undertaken, contact me for more information.
Posts: 9
Threads: 1
Joined: Aug 2012
(09-08-2013, 08:45 PM)Jonny81191 Wrote: (09-08-2013, 08:44 PM)andyhobden Wrote: I was worried that I would sound like a fool
You're in the right place then!
Sweet :-) nuts and bolts I can cope with but electrics con fuse me .......
Posts: 585
Threads: 9
Joined: Jun 2012
Reputation:
3
Location: Wiltshire
Car Model/Spec: XSI 16v
(09-08-2013, 03:27 PM)puglove Wrote: have you taken them right out a looked properly (under the bonnet)
Learning fro experience I see 
You wouldn't do anything like that though would you !
![[Image: untitled_zps1adc0365.png]](http://i1038.photobucket.com/albums/a468/167gti8/untitled_zps1adc0365.png)
138 BHP XSI
(21:20:51) Just_Sean: i had a pokey bum wank in the bath once and i shit you not, i burped a bubble
Posts: 9
Threads: 1
Joined: Aug 2012
09-08-2013, 09:19 PM
(This post was last modified: 09-08-2013, 09:23 PM by andyhobden.)
(09-08-2013, 09:07 PM)Mrs puglove Wrote: (09-08-2013, 03:27 PM)puglove Wrote: have you taken them right out a looked properly (under the bonnet)
Learning fro experience I see
You wouldn't do anything like that though would you !
Nice !
(09-08-2013, 09:07 PM)Mrs puglove Wrote: (09-08-2013, 03:27 PM)puglove Wrote: have you taken them right out a looked properly (under the bonnet)
Learning fro experience I see
You wouldn't do anything like that though would you !
Nice !
Giggidy
Posts: 813
Threads: 27
Joined: Jan 2013
Reputation:
8
Location: .
Car Model/Spec: PEUGEOT 308 FELINE
Posts: 15,645
Threads: 541
Joined: Dec 2011
Reputation:
124
Location: Aylesbury
Car Model/Spec: 320bhp Impreza WRX
Welcome along mate, seems like your battery might of seen better days.
|
![[Image: DSC_0190-Copy_zpsf093f84d.jpg]](http://s1038.photobucket.com/user/167gti8/media/DSC_0190-Copy_zpsf093f84d.jpg.html)
