Posts: 833
Threads: 214
Joined: Feb 2012
Reputation:
0
Location: Wrexham Wales
Car Model/Spec: 306 hdi meridian
05-07-2013, 08:58 AM
(This post was last modified: 15-07-2013, 08:54 AM by Welshy_Pete.)
I need to test the wiring on the socket plug for the central locking unit.
Also how about a test for the central locking unit?
I got 2 multi meters but not the best at using them so any help would be great. I've got the door card of ready to start.
I've just fitted a new loom in the driver door. The windows, mirrors and interior light all work fine.
306 hdi thanks
Posts: 545
Threads: 42
Joined: Jun 2013
Reputation:
8
Location: basingstoke
Car Model/Spec: bone rattler 306...
Dont quote me mate but with a multi meter u need to locate the live feed on it then i think you test the corrosponding wires IE red live and say green and purple go to locking mech you put the negative feed on the green or purple and a reading should come up....like i said dont quote me lol...
(msg sent from hell)
If i dont c ya threw week ill c ya threw window.
Posts: 833
Threads: 214
Joined: Feb 2012
Reputation:
0
Location: Wrexham Wales
Car Model/Spec: 306 hdi meridian
So is there anymore idea's on this as I would really like to test the motor and wiring out asp.
thanks
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
it just receives a switching live feed of 12vs
to unlock the live goes in one wire and to lock, the opposite one.
simples
Posts: 833
Threads: 214
Joined: Feb 2012
Reputation:
0
Location: Wrexham Wales
Car Model/Spec: 306 hdi meridian
So just put the red probe on the red power feed wire. Then the black probe on all the other colour wires?
Also while testing that try using the central locking to see if any changes happen on the feed to?
Posts: 833
Threads: 214
Joined: Feb 2012
Reputation:
0
Location: Wrexham Wales
Car Model/Spec: 306 hdi meridian
14-07-2013, 08:01 PM
(This post was last modified: 15-07-2013, 08:55 AM by Welshy_Pete.)
I got the central locking working in the end. I put anther door piller loom in. So that sorted out afew things. The central locking still wouldn't work. So I got anther motor connected it to the loom connector and it worked fine.
You could lock the doors on the driver side only manual with the key due to that motor not working. But could open and close the others once the driver door was locked using the remote. But the driver side wouldn't with the remote due to the motor.
So now I've fitted a new motor on the car its working great now.
