Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Black 306 1.9 D-Turbo T Reg
#1
   
   

The time has come to part ways with my much loved 306, owned for almost 2 years and has been a great little runaround, quick, reliable and economical. Had lots done to this car with lots of money spent, it has been well looked after.

Details:
- 115,000miles (Body), 85,000 miles (DHX Engine).
- T Reg, 1.9 Xantia engine.
- MOT Sept '13
- Tax 6 Months
- Lincolnshire

Good Bits
TURBO - T25/T2 hybrid turbo custom built and precision dynamically balanced, fitted with 360 degree thrust bearing for reliable high levels of boost. Relatively low lag for good driveability with good power, currently holding at ~24psi.
BOSCH PUMP - Gov mod, shimmed ~6mm, ground LDA etc. Currently in 'low fuel' tune, still boosts to 24psi and pulls well but no smoke.
Black Powdercoated Cyclones - Perfect condition with almost new Uniroyal Rainexpert Tyres.
Ph3 crystal headlights with black masks.
Leather Bonnet Bra
POWERFLEX BITS - Full wishbone bushes and lower engine mount.
Coilovers - Adjustable, lowered ~ 80mm on front, lowered rear to match.
Large FMIC with 2.5" pipework, Xantia manifold and Mikalor Clamps.
Full SS Straight through exhaust with gutted Scorpion '6 box.
Semi-stripped interior - Soundproofing and carpets gone.
Boost gauge plumbed in and working, water temp, oil temp and oil pressure gauge installed with senders and sandwich plate, just need wiring in (will get pics).
Sony X-plod CD player with Juice 250W (i think) 6x9 speakers in parcel shelf.
De-badged and tinted rears.
De-wipered boot.

Bad Bits
Large Scratch in front wing.
Could do with new glowplugs.
Front bumper could use some attention.
Dint in bonnet (Covered by bra)

Looking for £800, though bits can be negotiated e.g. I have the original wheels so I could put these back on and sell a bit cheaper if asked.

Other Bits (I havent had time to finish) can be negotiated seperately
- Ph3 smoother front bumper ready for paint.
- GTI 6 Front calipers.
- HDI Rear Disc beam
- Original 14" alloys
- Original Struts with -60mm lowering springs.
- Original Exhaust (free to good home)

Feel free to PM me for info on anything listed or to arrange viewing.

Cheers,

Jim


Attached Files Image(s)
   
#2
Where are you located.
NO SMOKE NO POKEBig Grin
#3
near Lincoln
#4
Too far sorry mate its over a 300 mile round trip
NO SMOKE NO POKEBig Grin
#5
no worries bud, thanks for lookin!
#6
Want:/
Doesnt even own a 306.
#7
That's a fair price with virtually new tyres all round and all the other stuff done on it - GLWTS!
#8
You had it rr'd?
[Image: 704e7db1.jpg]
#9
Oh massive wants.

Swap for an e36 3 series compact with 64k on it? Immaculate condition..
#10
Not been rr'd and no swaps, sorry. Get ur e36 sold and buy it!
#11
328 miles from me. Balls.
Doesnt even own a 306.
#12
211 miles away - this is an absoloute steal!
Phaes 1 GTI 6  -  Onyx Black
#13
Wow, this is beautiful.
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
#14
My insurance comes down a bit aswell... Always wanted a black one... Uh oh
Doesnt even own a 306.
#15
Thanks for the positive comments guys. It's in good condition but by no means perfect. You can see the scratch on the front wing in one photo. I would possibly be able to meet half way for diesel cost depending on distance.
#16
So what kind of power do you think it is?
[Image: 704e7db1.jpg]
#17
YHPM Smile
Doesnt even own a 306.
#18
Seems to be ignoring my pms?
[Image: Untitled-1_zpsc57da38e.jpg]
#19
(05-03-2013, 06:56 PM)padge Wrote: Seems to be ignoring my pms?

I havent had a reply either, dont worry mate im sure hes just busy Smile
Doesnt even own a 306.
#20
sorry about late replies, been busy at work.

as to the kind of power, your guess is as good as mine mate.
#21
(05-03-2013, 07:32 PM)d-jimbo Wrote: sorry about late replies, been busy at work.

as to the kind of power, your guess is as good as mine mate.

would've thought you'd have a better idea than Birk given you've driven it! . Big Grin . . .gotta be over 150bhp i would have thought . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
#22
couple of little things i forgot to mention in the original post. colour coded rub guards, smoked side repeaters, could do with new clutch cable at some point and the handbrake needs adjusting. I'll get a picture of the interior up in the next couple of days if its still here, the gauges are mounted in the centre vent housing.

my ass-dyno is probably well out of calibration. as i said its in a low fuel tune at the mo, just to make sure it didnt smoke for the mot but when it was turned up it embarrassed a remapped golf gt tdi 150 accelerating from around 30-70

that being said the golf is a much heavier car with longer gearing
#23
nice motor mate sell it as it is ........... 800 is cheap enough let alone make it cheaper
#24
Wanna swap for a 6 Smile lol

Glws
Vehicle repair and servicing in the midlands pm for details 

Current cars
Subaru Impreza 2.0d - Daily
306 1.8 - track whore soon to be GTI6
#25
thanks readie, ta for the offer dan. not lookin for swaps though i'm afraid
#26
Im guessing its still for sale?
Doesnt even own a 306.
#27
Provisionally sold, should be picked up tonight.

I'll let them say who they are!
#28
Bugger.
Doesnt even own a 306.
#29
I know, I know :p
[Image: 704e7db1.jpg]
#30
(07-03-2013, 08:22 PM)Birk Wrote: I know, I know :p

It wasnt you was it? Confused
Doesnt even own a 306.


Possibly Related Threads…
Thread Author Replies Views Last Post
  Y Reg 2001 306 HDI D Turbo Rare Black 3 Door Tom85 3 4,573 01-01-2018, 12:05 PM
Last Post: aircool
  Black 5 door 306 hdi d turbo spec Mikefish100 19 8,344 07-05-2014, 12:30 PM
Last Post: Mikefish100
  1999 Black PH3 D-Turbo with Bosch Pump bigcheez2k3 28 18,415 13-03-2013, 08:01 PM
Last Post: Scott

Forum Jump:


Users browsing this thread: 1 Guest(s)