Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Breaking Complete 306 GTi/Rallye in White
#1
Breaking Complete 306 GTi/Rallye in White (all there bar engine, Loom and ECU)

Summary

Phase 2 Bonnet £30.00, couple of marks around the washer jets
Front Bumper £45.00
Front Struts and std Springs £30.00
Rear Beam £100.00, No camber or knocks, covered 5k in my ownership
ABS Module £25.00
Doors Complete £25.00
Hatch Phase 2 complete £25.00
Half leather/Alc Seats, Drivers base ripped as they all are, others OK £40.00 lot (Side airbag versions)

Anything else just ask, car going by the end of 8 Feb
#2
How much for the m/c?
[Image: edit2_zpsbe60b3ca.jpg]

Team derv FLAME and CONROD spitters
#3
Rear calipers posted price please
Supercharged XUD Project - Dead

HDi Cabby Project Click
#4
Master cylinder £20.00 delivered, will come complete with the resiviour too

Rear Callipers as I tend to use them myself allot I've got to ask £35.00 each plus £10.00 delivery
#5
Rear bumper?

[Image: DSC_0190-Copy_zpsf093f84d.jpg]
Member of 99% warning or your nothing club!

#6
Rear bumper is under offer at the moment, Will post later in the week if it goes or not
#7
Ok cheers

[Image: DSC_0190-Copy_zpsf093f84d.jpg]
Member of 99% warning or your nothing club!

#8
Pics of seats

Also dibs on them
[Image: 306ocsig_edited-1-1.jpg]


306 HDI, soon to be XUD
#9
It should be a crime to break a bianca 6/Rallye
[Image: IMG_20130925_181339_zps95df48fa.jpg]
#10
Bit pricey on the calipers. Ill leave it mate. Could do with the mirror caps though
Supercharged XUD Project - Dead

HDi Cabby Project Click
#11
Drivers seat base is worn out, Rest are OK thou but again these would be collection only
#12
Nsf hub assembly, how much and is it an 18mm? Can collect from tonight.
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



#13
Any proof the beams ok?
What was the beam off?
Brakes with them? Handbrake cable?
#14
Pica of seats please
[Image: 306ocsig_edited-1-1.jpg]


306 HDI, soon to be XUD
#15
(03-02-2013, 05:37 PM)puglove Wrote: Rear bumper?

for the xsi ??
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
#16
Are the seats for a 3 door or 5 door 306?
#17
have you still got the alternator??
#18
3 door seat's, I'll get a pic tomorrow as it's being broken then

Poodle, I'll check the hub's but I should have a 18mm one somewhere in stk

Alt is not available as it's going into a 205 with the engine.

Beam, It's a used 306 beam which I always say with my listings of them, It works fine and was used by me for a good few months, No camber, knocks or bangs, bar taking it apart you will never know. (I bet no other beam seller will say that)
No brakes or cables (Get cut) and I always have a use for the callipers but they can be supplied at £35.00 each.
#19
Shocks and springs come with topmounts?
[Image: A1A3B2B1-9269-463A-9F21-2ABF4CE9BEAC-165...A3B3F7.jpg]
#20
Yes they are complete, std dampers and std springs, £10.00 each side
#21
Sound mate ill have them.
Any idea on postage?
Rather use a courier than royal fail if possible.
Drop me a pm
[Image: A1A3B2B1-9269-463A-9F21-2ABF4CE9BEAC-165...A3B3F7.jpg]
#22
Pic's of seats here
[Image: DSC_0296_zpscea1a1eb.jpg]

&

[Image: DSC_0297_zps12221738.jpg]

Rears are hardy used so very good.

Car is going tomorrow so if anyone wants anything please let me know ASAP
#23
reverse cable posted matey?
#24
Can do the cable for £10.00 all in
#25
pm sent


Possibly Related Threads…
Thread Author Replies Views Last Post
  BREAKING phase 2 xud 306 sedan bianca white Jamieh2013 56 25,391 15-12-2014, 07:52 AM
Last Post: Jonny81191
  G.I low boost rallye breaking 7057sam 25 12,241 07-09-2013, 11:33 AM
Last Post: 7057sam
  BREAKING: Phase 1 XLdt 5 dr, Bianca White. Ask and ye shall receive. me-tm 3 3,225 23-06-2013, 02:38 PM
Last Post: pug_dturb

Forum Jump:


Users browsing this thread: 1 Guest(s)