Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HID's
#1
Right, I know a lot of you guys don't like them etc etc but each to there own imo, I know there illegal but i want some...

But tbh i don't know what im looking for..Is there a certain "H" i should be looking for a fitment or something?? im clueless when looking for them..


these are what i've been looking at.


http://www.ebay.co.uk/itm/330769213028?v...1438.l2649

Would i be right in getting them or? Confused
306 HDi Dturbo- China Blue

#2
You need h7's and personally I'd go either 6000k or 8000k!
[Image: A1A3B2B1-9269-463A-9F21-2ABF4CE9BEAC-165...A3B3F7.jpg]
#3
Mine are h7 4300k and are a white with a slight hint of blue my mate has 6000k and they still look white but with a tint of blue but when they're next to each other you can really tell the difference

After following my mate and coming the other way against him he said he didn't notice glare and said it was fine
But if you are worried about glare get the capped ones which are H7r's
[Image: IMG_20130925_181339_zps95df48fa.jpg]
#4
not too bothered by the glare, so the ones on the link above should be spot on yeah??
306 HDi Dturbo- China Blue

#5
I don't see why not. Make sure you specify you want H7 and whatever colour temp you want
[Image: IMG_20130925_181339_zps95df48fa.jpg]
#6
Would be interested in some HID's for my ph1 if they were cheap enough. Are they easy to wire up?
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
#7
Very easy to wire up. They're plug ans play you plug the bulb into the ballast. Then the ballast just plugs to the loom then put the bulb in the holder like usual :-)
[Image: IMG_20130925_181339_zps95df48fa.jpg]
#8
(09-11-2012, 11:53 AM)silverzx Wrote: Would be interested in some HID's for my ph1 if they were cheap enough. Are they easy to wire up?

youd get horrendous scatter on the ph1 due to the frosted lense, personally, i wouldn't bother, i reckon it'd give too wild a beam pattern

(im not against HIDs at all btw, just think on frosted lense they'd be a bit of a waste of time. IMO, of course)
[Image: k6f9Fk]


Member of the 99% warning or you're nothing club
#9
HID's FTMFW!!!
Best mod ever!
#2 Moonstone Blue HDI
[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]
#10
H7R 4300k..... Enough said!! Big Grin
[Image: Sig3_zpscd005eb1.jpg]
#11
(09-11-2012, 12:43 PM)Alee83 Wrote: H7R 4300k..... Enough said!! Big Grin

exactly what i have - amazing difference! The 'R' part means the bulbs are for none projector headlights.
#12
Theres that many other bastards out there with bright f*cking lights, i just bought a set of hids because i got fed up with not being able to see when other cars are coming at me!
Doesnt even own a 306.
#13
I was only going to buy the above because they were cheap, and would improve my lights, to be frank they are pretty shit atm, do they cost much to have the 'R' versions?
306 HDi Dturbo- China Blue

#14
It's just different bulbs iirc!
I was tempted with the turbo revs versions, they are only £30 and I know turbo revs are a pretty reputable company (as far as eBay goes)
[Image: A1A3B2B1-9269-463A-9F21-2ABF4CE9BEAC-165...A3B3F7.jpg]
#15
i paid less than £30 delivered off ebay for mine, really nice quality and at the same price as a set of decent 'normal' bulbs, well worth it!
#16
You got a link Dave?
[Image: A1A3B2B1-9269-463A-9F21-2ABF4CE9BEAC-165...A3B3F7.jpg]
#17
(09-11-2012, 12:19 PM)samass Wrote:
(09-11-2012, 11:53 AM)silverzx Wrote: Would be interested in some HID's for my ph1 if they were cheap enough. Are they easy to wire up?

youd get horrendous scatter on the ph1 due to the frosted lense, personally, i wouldn't bother, i reckon it'd give too wild a beam pattern

(im not against HIDs at all btw, just think on frosted lense they'd be a bit of a waste of time. IMO, of course)


They're not that bad tbh. Not as bad as it sounds like anyway after being around a ph1 with hids
[Image: IMG_20130925_181339_zps95df48fa.jpg]
#18
(09-11-2012, 06:17 PM)Oil-burner Wrote: You got a link Dave?

it was ebay item 200710430155. i notice they were actually 5000k and not 4300k and on offer for £29.99 delivered then went back to £49.99.

these look similar but are 6000k so have a slightly more blue tint:

http://www.ebay.co.uk/itm/XENON-HID-CONV...3ccaa25c2b
#19
well I've bought them, for the sake of £20 i can't complain really..
306 HDi Dturbo- China Blue

#20
the h7R didnt really give much of a better beam pattern imo.. gonna get some angels and cut the R bit of
#21
I have a set of 8k hid kit for sale Wink
#22
The H7r i had the coating has come off them!
#23
Mikefish100 YHPM
[Image: A1A3B2B1-9269-463A-9F21-2ABF4CE9BEAC-165...A3B3F7.jpg]
#24
dave1221 - have to say that VIPHID kit in the link looks a billy bargain and I've had the VIP ballasts before on my ph1 and they never let me down.
#25
Looking at this I'm quite interested in a set of these also would I see any improvement over standard on a phase 2 with standard lights also how do they fit are they an absolute bitch to fit
#26
Candles would be an improvement over phase 2 frosted lights....
#27
i have the ones linked to in the OP. obviously in H7 and i think they are 8K or 6K.
#28
The frosted lights are pretty useless tbf worse than the lights on my old mk3 golf and they were dire
#29
if he has ph2 frosted lights then H7s are useless!
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
#30
Just fitted mine they need there own power supply and seperate earths which i didnt know bfore hand but it makes sense really. They're heck of a bright and look really cool. I dont care if i look like a prick lol Smile
Doesnt even own a 306.


Forum Jump:


Users browsing this thread: 1 Guest(s)