Posts: 2,490 
	Threads: 164 
	Joined: Jun 2012
	
 Reputation: 
 25
Location: Honiton
 Car Model/Spec: Gti6
 Thanks: 0 
	Given 4 thank(s) in 4 post(s)
  
	 
 
	
		
		
		20-10-2012, 02:50 PM 
(This post was last modified: 20-10-2012, 02:51 PM by rocker8742.)
	
	 
	
		Getting fed up with the problems i hae with the '6 and decided i need to get it all sorted before buying anymore cosmetic things so I've put a list of the main problems in here to ask advice and get questions answered 
Any help / ideas are appricated
 
I realise most of these bits are probably simple to you guys but im a tard when it comes to mechanics
 
Rear beams gone so will be replacing it soon, Any reccomendations for extras i should change/add while its off the car
 
Central locking is playing silly buggers locking randomly while driving or with keys in ignition, thinking this could be a door loom issue? Whats the best way of testing + repairing the door looms?
 
ICV is dodgey and needs replacing i think this caused the problem i had yesterday of it not idling at all when started and just stalling - Will be replaced come payday
 
Radiator is rusty as anything and the coolant keeps going rust coloured even after a good flush, Want to replace this soonish really but is there any major benefit from using a nissens rad over standard replacement?
 
Thermostat is buggered (I think) sits at 70 when running but goes up when sat still, Plan to replace this at the same time as the radiator to save changing coolant again
 
The fans dont come on anymore, could this be related to the thermostat not getting up to temp to switch them on? (assuming thats how they work lol)
 
Got quite a judder when braking hard, which im thinking either warped discs / low pads and discs, plan to replace them soon as, are pagid discs any good?
 
Got a cracked windscreen but thats a fairly easy remedy lol been quoted £115 to replace it
 
Needs a service + Cambelt doing anyone fancy doing the belt and pump for me ? Wouldnt have a clue where to start or trust myself enough with that and cant really afford £350 i was quoted
 
List isnt quite as long as i thought itd be but I've probably missed a few small bits 
Cheers
 
 
PS wasnt sure where to put this so its in here, feel free to move   
	 
	
	
	
		
	 
 
 
	
	
	
		
	Posts: 2,659 
	Threads: 115 
	Joined: Apr 2012
	
 Reputation: 
 26
Location: Stow
 Car Model/Spec: 306
 Thanks: 3 
	Given 0 thank(s) in 0 post(s)
  
	 
 
	
	
		All quite easy repairs mate  
If you need any parts mate let me know have the diablo i can raid for you  
	 
	
	
 
 
 
 
	
		
	 
 
 
	
	
	
		
	Posts: 2,490 
	Threads: 164 
	Joined: Jun 2012
	
 Reputation: 
 25
Location: Honiton
 Car Model/Spec: Gti6
 Thanks: 0 
	Given 4 thank(s) in 4 post(s)
  
	 
 
	
	
		Might take the  rad off you if its in good ish nick?
	 
	
	
	
		
	 
 
 
	
	
	
		
	Posts: 1,847 
	Threads: 56 
	Joined: Feb 2012
	
 Reputation: 
 19
Location: Chesterfield
 Car Model/Spec: Moonstone HDi
 Thanks: 0 
	Given 0 thank(s) in 0 post(s)
  
	 
 
	
	
		If you have a national windscreens near you mate windscreens are £85 fitted
	 
	
	
	
		
	 
 
 
	
	
	
		
	Posts: 2,659 
	Threads: 115 
	Joined: Apr 2012
	
 Reputation: 
 26
Location: Stow
 Car Model/Spec: 306
 Thanks: 3 
	Given 0 thank(s) in 0 post(s)
  
	 
 
	
	
		Will check it for you tomorrow mate. If you was going to road trip down for the beam you could of had the windscreen for free if i can get it out   
	 
	
	
 
 
 
 
	
		
	 
 
 
	
	
	
		
	Posts: 2,490 
	Threads: 164 
	Joined: Jun 2012
	
 Reputation: 
 25
Location: Honiton
 Car Model/Spec: Gti6
 Thanks: 0 
	Given 4 thank(s) in 4 post(s)
  
	 
 
	
		
		
		20-10-2012, 05:24 PM 
(This post was last modified: 20-10-2012, 05:25 PM by rocker8742.)
	
	 
	
		Thats sounding like a good deal tbh mate   
Will try national windscreen first though
 
 
and  itd be a road trip up   
	 
	
	
	
		
	 
 
 
	
	
	
		
	Posts: 2,659 
	Threads: 115 
	Joined: Apr 2012
	
 Reputation: 
 26
Location: Stow
 Car Model/Spec: 306
 Thanks: 3 
	Given 0 thank(s) in 0 post(s)
  
	 
 
	
	
		Sorry yh ment road trip up lol will check the rad for you tomorrow mate and let you know condition   
	 
	
	
 
 
 
 
	
		
	 
 
 
	
	
	
		
	Posts: 5,203 
	Threads: 110 
	Joined: Jan 2012
	
 Reputation: 
 20
Location: Devon
 Car Model/Spec: Estate, DT, GTI6 and 205
  
 
 
Thanks: 1 
	Given 30 thank(s) in 30 post(s)
  
	 
 
	
	
		If you want me and my mate could give you a hand doing some bits like the cam belt and that. I would think that it would be best to do the rad, thermostat and cambelt/water pump all together so saves keep refilling the coolant. You will have to let me know!
	 
	
	
	
		
	 
 
 
	
	
	
		
	Posts: 2,490 
	Threads: 164 
	Joined: Jun 2012
	
 Reputation: 
 25
Location: Honiton
 Car Model/Spec: Gti6
 Thanks: 0 
	Given 4 thank(s) in 4 post(s)
  
	 
 
	
	
		Cheers for the offer matt will have to wait a while until i get all the bits together though
	 
	
	
	
		
	 
 
 
	
	
	
		
	Posts: 5,203 
	Threads: 110 
	Joined: Jan 2012
	
 Reputation: 
 20
Location: Devon
 Car Model/Spec: Estate, DT, GTI6 and 205
  
 
 
Thanks: 1 
	Given 30 thank(s) in 30 post(s)
  
	 
 
	
	
		ok mate. you got an axle coming?
	 
	
	
	
		
	 
 
 
	
	
	
		
	Posts: 2,490 
	Threads: 164 
	Joined: Jun 2012
	
 Reputation: 
 25
Location: Honiton
 Car Model/Spec: Gti6
 Thanks: 0 
	Given 4 thank(s) in 4 post(s)
  
	 
 
	
	
		Yeah probably gonna be getting one from r45
	 
	
	
	
		
	 
 
 
	
	
	
		
	Posts: 2,659 
	Threads: 115 
	Joined: Apr 2012
	
 Reputation: 
 26
Location: Stow
 Car Model/Spec: 306
 Thanks: 3 
	Given 0 thank(s) in 0 post(s)
  
	 
 
	
	
		 (20-10-2012, 08:38 PM)rocker8742 Wrote:  Yeah probably gonna be getting one from r45 
I can do it cheaper if you dont want the calipers exc mate if it helps   
	 
	
	
 
 
 
 
	
		
	 
 
 
	
	
	
		
	Posts: 2,490 
	Threads: 164 
	Joined: Jun 2012
	
 Reputation: 
 25
Location: Honiton
 Car Model/Spec: Gti6
 Thanks: 0 
	Given 4 thank(s) in 4 post(s)
  
	 
 
	
	
		Sounds even better mate    PM details?
	  
	
	
	
		
	 
 
 
	
	
	
		
	Posts: 1 
	Threads: 0 
	Joined: Oct 2012
	
 Thanks: 0 
	Given 0 thank(s) in 0 post(s)
  
	 
 
	
	
		Most likely your mass air flow sensor is bad, have a diagnosis performed, cost about 150. for the sensor, 1 hour diag..
	 
	
	
	
		
	 
 
 
	
	
	
		
	Posts: 3,984 
	Threads: 138 
	Joined: Dec 2011
	
 Reputation: 
 72
Location: Milford, Surrey
 Car Model/Spec: Mincebus
 Thanks: 0 
	Given 0 thank(s) in 0 post(s)
  
	 
 
	
	
		 (25-10-2012, 07:39 AM)laira10 Wrote:  Most likely your mass air flow sensor is bad, have a diagnosis performed, cost about 150. for the sensor, 1 hour diag.. 
These engines don't have MAF sensors mate, they run a map sensor and an o2/lambda sensor and adjust the fuel/spark advance accordingly.
	  
	
	
'99 Ph3 Diablo Gti(Victor) Dead
Astor 'X' 4 GTi6- 6 - SOLD!   
'08 LY Renault Megane RS 230 F1 Team R26 - GONE 
'56 BMW Z4 Coupe 3.0si Sport - SCHWIIIING!
  
	
		
	 
 
 
	
	
	
		
	Posts: 212 
	Threads: 27 
	Joined: Dec 2011
	
 Reputation: 
 0
Location: Bournemouth
 Car Model/Spec: Rallye
 Thanks: 0 
	Given 0 thank(s) in 0 post(s)
  
	 
 
	
	
		running at 70 and going up at idle sounds right. it will take a lot for you fans to kick in, I gather its not going into the red?
	 
	
	
 
 
	
		
	 
 
 
	
	
	
		
	Posts: 1,046 
	Threads: 71 
	Joined: May 2012
	
 Reputation: 
 4
Location: cornwall
 Car Model/Spec: 205 dt
 Thanks: 0 
	Given 0 thank(s) in 0 post(s)
  
	 
 
	
	
		unplug the brown switch for fans going into thermostat, and they should come on constantly, give you an indicatopr if they're broken or something else (the plugs may be wrong its on the passenger side of engine) 
 
but as said they do seem to creep up a bit in the traffic, scared me a bit
	 
	
	
 
Midnightclub Wrote:All the cool kids have ph 2 Nile 6's! 
 
	
		
	 
 
 
	
	
	
		
	Posts: 2,490 
	Threads: 164 
	Joined: Jun 2012
	
 Reputation: 
 25
Location: Honiton
 Car Model/Spec: Gti6
 Thanks: 0 
	Given 4 thank(s) in 4 post(s)
  
	 
 
	
	
		Fair enough i was used to the 1.4 sitting at 90 on the move thought the gti would be similar 
 
Had it sat for a while last night and the fans did kick in just after 90 so im probably being paranoid about that
	 
	
	
	
		
	 
 
 
	
	
	
		
	Posts: 212 
	Threads: 27 
	Joined: Dec 2011
	
 Reputation: 
 0
Location: Bournemouth
 Car Model/Spec: Rallye
 Thanks: 0 
	Given 0 thank(s) in 0 post(s)
  
	 
 
 
	
	
	
		
	Posts: 14,208 
	Threads: 448 
	Joined: Dec 2011
	
 Reputation: 
 51
Location: isle of wight
 Car Model/Spec: Pov. Spec White '6
 Thanks: 17 
	Given 18 thank(s) in 18 post(s)
  
	 
 
	
	
		As jimmy said thats fine. The these cars run very hot, in the space of 5 mins mine will hit the fans twice easy
	 
	
	
 
TEAM CONROD SHITTING RALLYE! 
 
	
		
	 
 
 
	
	
	
		
	Posts: 2,490 
	Threads: 164 
	Joined: Jun 2012
	
 Reputation: 
 25
Location: Honiton
 Car Model/Spec: Gti6
 Thanks: 0 
	Given 4 thank(s) in 4 post(s)
  
	 
 
	
	
		so 70 is pretty much where it should be while driving?
	 
	
	
	
		
	 
 
 
	
	
	
		
	Posts: 19,854 
	Threads: 581 
	Joined: Dec 2011
	
 Reputation: 
 195
Location: Bournemouth
 Car Model/Spec: Supercharged 306 GTi6
  
 
 
Thanks: 36 
	Given 82 thank(s) in 78 post(s)
  
	 
 
	
	
		70-80 yeah
	 
	
	
Team Eaton 
 
 
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft  
 
	
		
	 
 
 
	
	
	
		
	Posts: 670 
	Threads: 80 
	Joined: Dec 2011
	
 Reputation: 
 10
Location: the petrol station
 Thanks: 0 
	Given 0 thank(s) in 0 post(s)
  
	 
 
	
	
		It's an 83 degree thermostat so it should sit at 83? Give or take a bit for the dodgy gauges but there's no way it should be down at 70 during normal driving I would have thought.
	 
	
	
![[Image: sigjpg.jpg]](http://i44.photobucket.com/albums/f32/cassandra--gemini/sigjpg.jpg) 
Serious.
  
	
		
	 
 
 
	
	
	
		
	Posts: 1,663 
	Threads: 62 
	Joined: Jul 2012
	
 Reputation: 
 10
Location: Rugby, Warwickshire
 Car Model/Spec: Golf 7 GTD : LBSC Rallye
 Thanks: 0 
	Given 11 thank(s) in 11 post(s)
  
	 
 
	
	
		 (25-10-2012, 07:49 AM)Ed Doe Wrote:   (25-10-2012, 07:39 AM)laira10 Wrote:  Most likely your mass air flow sensor is bad, have a diagnosis performed, cost about 150. for the sensor, 1 hour diag..  
These engines don't have MAF sensors mate, they run a map sensor and an o2/lambda sensor and adjust the fuel/spark advance accordingly. 
That's the kind of sense you get from a spambot.   
	 
	
	
Night Blue VW Golf 7 GTD : Bianca 306 Rallye : Mini Cooper D (The Mrs') 
![[Image: wallye-gtd.JPG?raw=1]](https://www.dropbox.com/s/pcxk1pgpaucznvr/wallye-gtd.JPG?raw=1) 
HDi Owner for 200k/9 years
  
	
		
	 
 
 
	
	
	
		
	Posts: 5,205 
	Threads: 91 
	Joined: Dec 2011
	
 Reputation: 
 83
Location: Oxfordshire/Cornwall
 Car Model/Spec: Moonstone DT/Volvo V50
 Thanks: 2 
	Given 41 thank(s) in 41 post(s)
  
	 
 
	
	
		They should literally instantly come up to 83*C and sit there, they will bump up to about 90 whilst sat idling then will fall back to 83 as the fans cool it... They shouldn't run at 70*C, that's too cold to be optimal, they'll be poor on fuel that cold, mine sits at BANG on 83*C after a new thermostat soon as you're moving... Get a new thermostat, they're a few quid... 
 
I doubt the rad will be sending the coolant rust coloured, they're copper originally so it all goes green... However, a Nissens is much better as the core is Aluminium and will last significantly longer, the fine finned Valeo radiators are also very good, but they have the issue that you touch them and the fins crumple and look shit, they also slice the shit out your hands whilst working on them... Make sure you're using the pink stuff when changing the coolant... 
 
Juddering brakes - yeah, new pads and discs all round will sort it... 
 
Rear beam - if you can get a VTS beam it's a nice upgrade - solid beam mounts are a good upgrade, but do remove the passive rear steer... Depends how you like your car..
	 
	
	
 (16-05-2016, 10:45 AM)Toms306 Wrote:  Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in.   Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
  
	
		
	 
 
 
	
	
	
		
	Posts: 998 
	Threads: 139 
	Joined: Jul 2012
	
 Reputation: 
 9
Location: Taunton, Somerset
 Car Model/Spec: Bianca Rallye 205 GTi6 197 Cup
 Thanks: 0 
	Given 0 thank(s) in 0 post(s)
  
	 
 
	
	
		If you need a hand with anything or a second opinion I'm only up the road from you. 
 
Remov your door loom connector, check the terminals and pull back the rubber sleeve and check for broken wires - very common. I've replacements of most things if you ever need anything.
	 
	
	
Bianca Rallye 
1989 205 GTi6 on ITBs 
BMW Z4 3.0 
 
Thousands of GTi6 parts availabile.
 
	
		
	 
 
 
	
	
	
		
	Posts: 2,490 
	Threads: 164 
	Joined: Jun 2012
	
 Reputation: 
 25
Location: Honiton
 Car Model/Spec: Gti6
 Thanks: 0 
	Given 4 thank(s) in 4 post(s)
  
	 
 
	
	
		Nice one cheers for the advice and offers of help   
	 
	
	
	
		
	 
 
 
	 
 |