Turbo oil feeds re gauging interest!

[Jenkosowls]

Updated 05/10/12

The MK1 oil feed as il call it is designed to bolt to the original oil line to which all you have to do is bend it out of the way bolt on and forget. Currently only a k14 oil line has been developed with this although iirc the t2 lines are same fitting possibly others if any one can confirm this. i currently have this setup on a T25 with no issues at all and can acces the line through the wheel arch so is handy!

You get
1x High Pressure Braided Oil Line
1x Banjo Union Bolt
2x Copper washer

Pics







Fitting option 1

---

---

Mk2
Mk2 is designed to replace the whole line for new so plug and play straight forward. and will fit all blocks. this line is much easier to route around areas and line up.
fitting (awaiting price)

Prices
Mk1 price is £25.00 plus paypal fee unless by gift posted recorded first class for peace of mind. On made to order basis only with a maximum 2 day turn around usually within the same day except weekends

Mk2
The price will be £36.00 plus paypal fee unless by gift posted 1st class recorded but this does include a surcharge of £5 for the old block union break down of surcharge is £2.50 for the union and £2.50 first class recorded so in reallity the line cost just £31.00 as i pay for the union and you to post! Which is £8 more than the mk1 this is due to the new 8mm pipe being flared and bent and compression fitting and extra length of hose. Although this may well become cheaper as the hose length is over sized at the moment


Any info or interest contact me via pm

[Rippthrough]

^^The firm does the lines for the buggy and all the 4wd racers we've built, always been fantastic quality tbh.

[Ricky]

I will take a mk1 for td04

[HDIkyle]

Which version have you done mine by?

[Jenkosowls]

Which version have you done mine by?

Mk1 kyle Mk2 im yet to sort as apparently the connection into the block is a "funny" fitting

[Rippthrough]

Which version have you done mine by?

Sticky back plastic and toilet rolls.

[Mattcheese31]

whoop . . . .this shit is getting real easy . .

[HDIkyle]

Which version have you done mine by?

Sticky back plastic and toilet rolls.

Can i use duct tape as i like the black stealth look?

[Jenkosowls]

1st line sold! Being sent tomorrow afternoon 1st class Recorded any one else after any get the orders in tonight for dispatch tomorrow!

[londondan86]

Did it get confirmed that the fittings are the same between the turbos? Cash waiting if so

[Jenkosowls]

Did it get confirmed that the fittings are the same between the turbos? Cash waiting if so

hasnt been confirmed yet but im just about to put a thread up about it

[CJ_Derv]

not a bad setup that i had a hose made with a compression fittin an cut the pipe just after first bend out of block

Good price too as i paid £30

[cwspellowe]

Must.. not.. spend.. more....

[CJ_Derv]

Must.. not.. spend.. more....

haha so your ordering plates of me and this hose oops spent lol

[td_dan]

jenks send me your paypal

[Jenkosowls]

according to service box it only list one part number for the turbo oil feed for 4 turbos if people could pm me there chasis numbers for a Ko3 Gt15 and T2 il see what it shows up then

[cwspellowe]

I need a turbo before I get all this lot though!

[CJ_Derv]

I need a turbo before I get all this lot though!

if you got this lot youd soon have a turbo in no time

[dturbopeck]

mmmmmmmmm, am going to get made homeless if i buy 1, shes already taken my credit card off me, so if you guys can hel p me and buy some bits off the car am breaking, she will never no! well until she drives the pug and crashes it,

[Jake]

Anyone that doesn't have a big turbo by the end of the month has no excuse now. Plates and oil lines available this easy !

[Jenkosowls]

It's been confirmed the k14 and T2 share the same oil union nut just the k14 uses an adaptor. Still waiting on the remaing 2 now

[londondan86]

Ok mate, want! Payment details please, ill pay tonight!

[td_dan]

received today excellent quality and fast delivery thanks mate

[HDIkyle]

Got mine today also. Personally hand delivered But a magpie stole some of my shiney bits

[Jenkosowls]

I'm glad the first few that have been sent have been received! Any problems get in touch! I may need to increase the 2 day turn around as the supplier has said there running low in stock towards the weekends! But so far all so far have been dispatched within 24 hours and some delivered within 48 hours of receipt of money! Can't complain!

Cheers for those who have orders so far mk2 line is also looking promising

[Ricky]

Mine turned up yesterday also. Cheers bud.

[CJ_Derv]

Just wondering what size is the banjo bolt hole on the side as im using the standard ine and yours looks slightly bigger and im worried mine isnt big enough or am i just worrying too much it seems to be fine but jus dont want to starve the turbo of oil i should be purchasing one of your kits soon too as i would rather have a braided kit

[londondan86]

Received this morning mate. Top quality part and very good service. Thanks

[Jenkosowls]

Order going in Friday if any one wants one.

Mk2 on hold atm due to no real interest on any of the lines except those that have been sold cant afford to hold stock!

[Mattcheese31]

well i'll want one for a tdo4 when the adaptor plates get made up, the mk 2 version would be nice . .