28-08-2012, 04:23 AM
Can anyone assist me in telling me where the dash clocks get their earth from?
During my conversion to low boost I seem to have ended up with my clocks stuck at the following position - permanently. They don't spike here when the ignition comes on, they just sit here full stop. They were working fine beforehand (I installed the P3 front end and checked it)
Only thing I can think that i've disturbed is I took a few earths off in the engine bay to clean the area for painting, but I thought I put everything back where I found it.
Strange thing is the car runs fine but none of the gauges read out.
During my conversion to low boost I seem to have ended up with my clocks stuck at the following position - permanently. They don't spike here when the ignition comes on, they just sit here full stop. They were working fine beforehand (I installed the P3 front end and checked it)
Only thing I can think that i've disturbed is I took a few earths off in the engine bay to clean the area for painting, but I thought I put everything back where I found it.
Strange thing is the car runs fine but none of the gauges read out.
Night Blue VW Golf 7 GTD : Bianca 306 Rallye : Mini Cooper D (The Mrs')
HDi Owner for 200k/9 years
HDi Owner for 200k/9 years