25-06-2015, 09:51 AM
Just a post to see if anybody wants my flange?
I'll be getting another batch made and I wondered how many to get. The flange is 10mm stainless steel and it is designed to fit on to the Garrett GT1546S.
With this you can then weld a custom down pipe and increase the cross section.
I went for 60mm ID which gives an extra 50% flow area compared to the stock 48mm ID.
Price is £25 posted if you want one.
Here's an example of what you can make. Here I used a 2.5 inch CNC'ed V band clamp ready to go to the rest of the system. The pipe is a 90 bend which has been ovalised and then an extra bit attached to it to cover the whole area. I won't be selling the whole down pipe as I'm not great at welding, I am good at CAD work however so feel free to buy the flange.
If you have the borg warner KKK K03 then I can also make up a flange, I just need to get my hands on a turbo down pipe so I can design it. It might even be the same, but that does not seem very likely..?
![[Image: 11215882_856422021104577_913857192898507...e=55E9D7AC]](https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/11215882_856422021104577_913857192898507147_n.jpg?oh=542049a1a1fc7e7ec4d387d8c06d937b&oe=55E9D7AC)
![[Image: 11535923_856422017771244_723127773953006...e=561D5A4D]](https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xat1/v/t1.0-9/11535923_856422017771244_7231277739530066726_n.jpg?oh=4c1ce6a48f5257fd1d986c5ca4933ab4&oe=561D5A4D)
I'll be getting another batch made and I wondered how many to get. The flange is 10mm stainless steel and it is designed to fit on to the Garrett GT1546S.
With this you can then weld a custom down pipe and increase the cross section.
I went for 60mm ID which gives an extra 50% flow area compared to the stock 48mm ID.
Price is £25 posted if you want one.
Here's an example of what you can make. Here I used a 2.5 inch CNC'ed V band clamp ready to go to the rest of the system. The pipe is a 90 bend which has been ovalised and then an extra bit attached to it to cover the whole area. I won't be selling the whole down pipe as I'm not great at welding, I am good at CAD work however so feel free to buy the flange.
If you have the borg warner KKK K03 then I can also make up a flange, I just need to get my hands on a turbo down pipe so I can design it. It might even be the same, but that does not seem very likely..?