Had a bit of a knock/rattle for a few days, after having a quick look under the car and the Anti roll bar has moved across a bit to the drivers side and the knock/rattle is the anti roll bar just catching on the passanger side wishbone.
So would this suggest that the anti roll bar bushes are worn? i have checked and everything is tight and the brackets that go round the bushes are fitted correctly. I had the same about 6 months ago and i just slackened everything off and moved the anti roll bar back over, but if it has done it again then surley the bushes must be worn. Or any ideas what else it could be ?
So looking on service box with my vin number ( car is a 2.0 hdi meridan x reg 2001) it says that the front anti roll bar is 19mm diameter does this sound about right?
Are the bushes simple enough to change, and has anyone tried these before, over standard ones.
http://www.ebay.co.uk/itm/281305737711?s...1418wt_941
Cheers and sorry about all the questions Titch
So would this suggest that the anti roll bar bushes are worn? i have checked and everything is tight and the brackets that go round the bushes are fitted correctly. I had the same about 6 months ago and i just slackened everything off and moved the anti roll bar back over, but if it has done it again then surley the bushes must be worn. Or any ideas what else it could be ?
So looking on service box with my vin number ( car is a 2.0 hdi meridan x reg 2001) it says that the front anti roll bar is 19mm diameter does this sound about right?
Are the bushes simple enough to change, and has anyone tried these before, over standard ones.
http://www.ebay.co.uk/itm/281305737711?s...1418wt_941
Cheers and sorry about all the questions Titch