Help! Ph1 to ph2/3 switch looms.

[ConorTRG]

Did you get it sorted yet?

Had another look there at a diagram and you should connect yours up like this:

Ph1 WHITE ---> PH2 RED (6000)
PH1 BLUE--->EITHER PH2 RED(606)OR BEIGE(607) If you connect them wrong pushing down on the switch with put the window up.
PH1 GREEN ---> EITHER PH2 RED(606) OR BEIGE (607) As above.
PH1 GREY ---> EITHER PH2 BEIGE(604) OR RED(605) As above.
PH1 BROWN ---> EITHER PH2 BEIGE(604) OR RED(605) As above.

Then you have your usual earths.