Breaking: Srowells P3 Diablo 5 Door 1.4

[Eeyore]

does the clock have temp also - pic of the plugs behind it would be ace, think the phase 3 clocks should fit phaes 1's. much love

Yep the clock is a P3 clock with the temperature. Picture of connections below.

How much for the Laguna splitter posted? If you can do it for 20 posted, I will take it!

Its currently on the car but ill try and get it off tomorrow and look into postage as well. I got it off a pugnet member last year and it was folded to fit in the post etc. As such it has a slight split in the middle on the top edge but thats the part that is fitted up to the bottom of the bumper so it isn't noticeable once fitted. Here is a pic of it fitted.

What sort of condition are the black angels in ? Any broken clips? Are they straight fit or do wires need to be chopped?

All clips are there and they are a straight fit. I think i rewired them and did it properly with solder and heatshrink. They were dirty inside so i took them apart and put them back together after cleaning them out. Also when i got them some bulbs were missing and they were yellow but I have replaced them now and they are white! They have the 3 leds down the side of each unit which are the normal T10 leds. Some are original but 2 or 3 were replaced with ones that dont quite fit as I couldnt find any of the square ones needed :/ I would have thought if you got some decent SMD T10s they would fit and work really well! I think there is some slight peeling on the lenses but its difficult to notice and i never found a solution to it :/ Maybe Ill try a bit of 1200 on it and see if that improves the finish. I am way to honest haha!

yellow to white conversion...

and with them on!