Hunter the B-road sigma..

[ginge191]

Ginge.............turn demo mode off on your head unit FFS

Looking good, the bumper crack I would fiberglass behind the bumper where you can't see it and then filler the front

Temp probe into the TMIC idea, if you want to give it a try I can bring you a top mount to FCS that you can have if you want it?

Car progress is looking good, as for weights inside the wheel............would you prefer them hammered over the edge of your wheel hock: Personally I would put up with them, if you having clearance issues with the brakes clearing the weights swap your wheels around so the ones with the least weights are on the front.

Yeh mark, it was where the HU had been unplugged, i dont enjoy watching what it has on offer

As for the bumper, when i head up to niall/grants , we're goiong to get some plastice welding on the back, the crack itself matches and joins quite well, so i may be able to get away with it. see what happens.

as for the wheel weights, most wheels have at least 2/3 weights on each, and if it was a small amount of noise, i would put up with it - but it's like i had a badger stuck to the wheels, witih a MENTAL thud every time the wheel took a rotation, at 30, its bad, 40.. scary.. and over that you can't speak...