30-04-2012, 05:00 AM
No need to take the washer bottle off, take the plastic liner off that sits underneath (3 torx screws, 2 through front of arch liner 1 through the bottom) the lift the arch liner up out of the way. Unclip the cap on the back of the fog light from the bottom and remove to change the bulb.
On the driver's side one there's a section of loom that makes getting the cap relocated a pain...to get round this undo the fixing screw that secures the bottom leg of the fog light. You can get the cap on a lot easier as there's a little movement in the fog light unit with this removed.
As Haynes would say, refitting is the reverse of the above.
On the driver's side one there's a section of loom that makes getting the cap relocated a pain...to get round this undo the fixing screw that secures the bottom leg of the fog light. You can get the cap on a lot easier as there's a little movement in the fog light unit with this removed.
As Haynes would say, refitting is the reverse of the above.