Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
XUD9 starts but dies in 2 seconds
#2
The car will run on 3 cylinders, take an injector line off and reposition it so its sticking up, and put the injector on the end - this means you'll visibly be able to see if its firing.

Try starting the car again and look to see if the injector stops firing when it dies. I suspect it will this sounds like a fuel issue.

Run a dedicated line to the pump with prime bulb, start and prime bulb at same time see if it runs for longer. If so then your fuel feed to pump is the issue. If it still dies then your pump is the problem.
[Image: 22f2b6b2-758b-4c1c-96fb-6fa9c6059b13_zpsf306b56b.jpg]
Reply
Thanks given by:


Messages In This Thread
RE: XUD9 starts but dies in 2 seconds - by Dave - 29-11-2018, 02:55 AM
RE: XUD9 starts but dies in 2 seconds - by Dave - 12-12-2018, 12:11 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
Wink (cold starts) the derv kind :) jpderv 34 14,671 18-02-2013, 10:32 AM
Last Post: Bananalad
  Blue smoke on starts (help) phillf 17 6,504 05-02-2013, 08:09 PM
Last Post: CJ_Derv
  Cut out, it starts but wont rev, loads of smoke Adam.M.Penny 25 7,407 07-12-2012, 01:04 AM
Last Post: Adam.M.Penny

Forum Jump:


Users browsing this thread: 1 Guest(s)