30-06-2017, 08:49 AM
Removing them is ok, once the droplinks are disconnected you can wiggle the ARB a lot. Refitting them is tricky, the brackets holding them down bolt down to the subframe through the p-bush as I am sure you can see.
The rear of the bracket just has a hook on it. It is difficult to get this hook in, and then pull the front down enough to get it through the bolt.
With the subframe off I imagine it is easy to build it all up and then put the whole assembly on the car. With it fitted the clearance isn't great. It is possible, just a PITA, but then I never was good at fiddly things!
The rear of the bracket just has a hook on it. It is difficult to get this hook in, and then pull the front down enough to get it through the bolt.
With the subframe off I imagine it is easy to build it all up and then put the whole assembly on the car. With it fitted the clearance isn't great. It is possible, just a PITA, but then I never was good at fiddly things!
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.
62k Diablo Phase 1 Gti-6: Project Thread
62k Diablo Phase 1 Gti-6: Project Thread
