03-04-2017, 09:05 AM
As per manual but make the "tool" to lock the auto tensioner via the "hole", then its easy, 1/4 drive ( from memory ) rachet etc for the manual tensioner, as per manual.
I used some scrap small dia tube of suitable length flattened at one end and drilled to take a "bolt and nut" that fits inside the autotensioner "hole", works a treat.
I used some scrap small dia tube of suitable length flattened at one end and drilled to take a "bolt and nut" that fits inside the autotensioner "hole", works a treat.