208 1.4 hdi tuning options

[loli_04]

Dr. Jekyll check this 1.4 hdi from Turkey I think, in the comments of some of his videos he says the setup...

It's something like:

2.0 hdi nozzles 
Head ported and polished
custom camshaft
hybrid turbo with intake of gt2556v and exhaust of gt15 2.3 bar stable
remap
exahust 
etc.

Impressive mate!!
___________
Luís

Cheers! All works kinda stopped atm as my own stage 3 hdi (306) just crapped out the injectors and began fitting an oil cooler on the upside i harvest the stronger 076 injectors from local scrap yards so have a fair few spare lol.

Unfortunatley some knobs keyed the 208 tho. Looking at getting it plastidipped but this is only when gunds are free later. We more set on modding it first then sorting the paint

Sent from my SM-G920F using Tapatalk

---

Have you got the link fella???

Sent from my SM-G920F using Tapatalk

Oh ok I see, is like me Mine is at garage atm and beggining to unmount the engine to clean/repair/prepare, but need to find some info's about 2 or 3 things though... If you can help me or steve, please i'm all ears!

So: What oil cooler and plate should I look for?
      What diesel cooler should I look for?
      How should I wire the FPRS? (mine have 3 wires all green!)

It's a stage 3 project looking for about 190hp and arround 340 lb/ft.
Last thing I'll gonna do is to fit HP pump (probably CP1S3/R75/10-1S, if I can find one, because is quite dificult get one in right conditions and I don't know how it will be to map   )

So specs that I'm thinking about are:

Garrett Gt1852v 
Intercooler 51mm (original) from a renaut dci (740mm x 200mm x 40mm), IC pipping 57mm
Downpipe 60mm + full 63,5 mm stainles steal exhuast system + 63mm stainless steal final backbox
1.6 HDi FPRS 
Oil cooler with bigger lines (aimming for 6L of oil) 
Diesel cooler and bigger fuel lines (12mm)
Upgraded lift pump (APS or Walbro?)

So please help me to reach PUGFEST with my project already donee! (and returning back!!!) Me and my wife are thinking about going there! 
    
I also need to find out a mapper who send me the map to portugal with enabled boost controller etc... And that explain me all I need to do to get the things done properly!!  

Cheers
___________
Luis