11-12-2016, 09:02 PM
Does the strange whine go away when brakes are applied, ours has a faint high pitched whine sort of noise from time to time.
Cam belt job is easy, don't put that off, some of the cam cover bolts are a a bit of a pita with large hands, w/pump off so a reflush is half done, flush rad both ways and heater. Don't forget crap in expansion tank. Crank bolt, see recent thread on that.
Be careful with rear screen heater spade connections, i left intact and cut wires some 10 inches or so from the rear screen spade connectors, the thick wires in the tailgate ( estate ) door looms where make and break contact, easy to thread new wires thru looms. from memory the l/h/side one is the earth one.
Cam belt job is easy, don't put that off, some of the cam cover bolts are a a bit of a pita with large hands, w/pump off so a reflush is half done, flush rad both ways and heater. Don't forget crap in expansion tank. Crank bolt, see recent thread on that.
Be careful with rear screen heater spade connections, i left intact and cut wires some 10 inches or so from the rear screen spade connectors, the thick wires in the tailgate ( estate ) door looms where make and break contact, easy to thread new wires thru looms. from memory the l/h/side one is the earth one.