19-06-2016, 11:05 AM
Some fair failing going on with this project for last month or two again, have been a bit busy / stuck with other projects and also the farm, so havent really touched this other than constantly pushing the car in / out of the workshop to do other vehicles, (this issue is getting old fast now after 3 years!!)
Anyway, there is some progress going on behind the scenes, flywheel is being skimmed, running a different flywheel now as required the crank reluctor sections for CP pickup. So have found the lightest stock flywheel for my fitment, and also the large clutch. Waiting on the that so I can bolt up clutch / trans.
Also waiting on another long block donor, for some parts at the other end of the engine, wanting to alter the cam belt arrangement, so hoping to rob some parts from the more modern style motor to do this...
No real updates, but still on the mind / slowly moving forward!
Anyway, there is some progress going on behind the scenes, flywheel is being skimmed, running a different flywheel now as required the crank reluctor sections for CP pickup. So have found the lightest stock flywheel for my fitment, and also the large clutch. Waiting on the that so I can bolt up clutch / trans.
Also waiting on another long block donor, for some parts at the other end of the engine, wanting to alter the cam belt arrangement, so hoping to rob some parts from the more modern style motor to do this...
No real updates, but still on the mind / slowly moving forward!
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |
![[Image: sigi-2.png]](http://i281.photobucket.com/albums/kk226/darrenjlobb/sigi-2.png)
| #DervMafia |
![[Image: sigi-2.png]](http://i281.photobucket.com/albums/kk226/darrenjlobb/sigi-2.png)