Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How's everyone piped up there fmic on hdi's?
#6
mine is 63mm down the site of the radiator, pushes a little bit but fits nice. LOADS of room behind the rad,

have seen a few people bring it up over the top of the rad, and also behind both headlights..


Personally you have 2 options for the pipework..

cold side over the back of the engine and across the top of gearbox, into the bottom of the IC, and then back up and over to the inlet elbow, or you can follow the OEM routing under the engine with the default pipework from a C5 HDi, (2.2) which is slightly better and into the bottom of the IC.. if you don't have a twinpass, you can simply route the outlet pipework back over the top of the IC and around the passanger side of the radiator.. there is LOADS of room there.
Given the choice between Niall and the sheep. I would choose the sheep!
/Toseland
Reply
Thanks given by:


Messages In This Thread
RE: How's everyone piped up there fmic on hdi's? - by toseland - 09-03-2016, 01:32 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
Photo 2.0 HDi Straight piped 306estate2.0HDi 0 1,228 06-12-2014, 08:10 AM
Last Post: 306estate2.0HDi

Forum Jump:


Users browsing this thread: 1 Guest(s)