16-02-2016, 09:12 PM
There are probably no videos as it's so simple! 
Remove the plastic cover bolts and lift off cover
Unplug the electric plugs from each coil
Remove the 2 bolts from the coil, pull it out (at this point might as well fit new spark plugs if you have some) push new coil in, refit bolts
Re-plug electric connector
Refit plastic cover and bolts
Do make sure everythings tight. Don't over-tighten anything.
Remove the plastic cover bolts and lift off cover
Unplug the electric plugs from each coil
Remove the 2 bolts from the coil, pull it out (at this point might as well fit new spark plugs if you have some) push new coil in, refit bolts
Re-plug electric connector
Refit plastic cover and bolts
Do make sure everythings tight. Don't over-tighten anything.