I'm running ARP's and hdi rods. What advance modifications can be done? I assume when you say gov mods you mean the cradle from a landy or transit pump can be used to gain travel?
I'm running about 20psi at the moment, with the 9mm maxed it burns clean as a whistle, very very little smoke.
Fitting a front mount soon, so the plan is to fit the 10mm and raise boost to around 24psi. Aiming for a well tuned 160-170hp.
Another question also. I assume when people refer to a 10 or 11mm head it is referring to the plunger that is a larger diameter? And can be measured to identify it as 9, 10, or 11mm. As I'm buying one already split so skeptical as to whether its the real deal. Not interested in buying another 9mm head lol
I'm running about 20psi at the moment, with the 9mm maxed it burns clean as a whistle, very very little smoke.
Fitting a front mount soon, so the plan is to fit the 10mm and raise boost to around 24psi. Aiming for a well tuned 160-170hp.
Another question also. I assume when people refer to a 10 or 11mm head it is referring to the plunger that is a larger diameter? And can be measured to identify it as 9, 10, or 11mm. As I'm buying one already split so skeptical as to whether its the real deal. Not interested in buying another 9mm head lol