21-11-2015, 10:15 AM
(This post was last modified: 21-11-2015, 10:17 AM by pug306driver.)
The white filter in the picture looks crushed, very similar to the man filter I fitted and then removed, being replaced by a pug one at £16 including vat, even after a small discount.
If the white one is a slightly larger diameter on the plastic ends, it must reduced the "gap" between the plastic ends and the filter body.
This must have an effect on fuel flow thru the filter thru the smaller gap?
If I remove the FPR from the hp pump and crank the engine, will anything other than fuel and dirt shoot out?
If the white one is a slightly larger diameter on the plastic ends, it must reduced the "gap" between the plastic ends and the filter body.
This must have an effect on fuel flow thru the filter thru the smaller gap?
If I remove the FPR from the hp pump and crank the engine, will anything other than fuel and dirt shoot out?