19-11-2015, 05:31 PM
Anything you want to fit over standard turbo will require fabrication
Either welding on, or adaptor plates made up - easy enough if you have the tools. could prove expensive if you're paying someone else.
T25 is mega old hat these days, td04 is alright and at least dirt cheap and will see you around 175bhp no probs.
gt2052s is a good shout, but you may run into problems with headbolts stretching and killing hg, or clutch slipping as they can make a fairly decent amount of torque low down in the rpm.
There are plenty of threads on here with turbo chat in them, or go your own way and fit something you think will work.
Either welding on, or adaptor plates made up - easy enough if you have the tools. could prove expensive if you're paying someone else.
T25 is mega old hat these days, td04 is alright and at least dirt cheap and will see you around 175bhp no probs.
gt2052s is a good shout, but you may run into problems with headbolts stretching and killing hg, or clutch slipping as they can make a fairly decent amount of torque low down in the rpm.
There are plenty of threads on here with turbo chat in them, or go your own way and fit something you think will work.