Has anyone changed glow plugs on one of these before? ZSOC has some vague directions as to where they are and that they're a pain but I'm not finding a guide or any good pictures on there.
Secondly, any ideas on how to see whether or not injector seals aren't sealing properly? I have closely looked around all the bases and there doesn't appear to be any carbon build-up. Could I spray wd40 around the bases and see if it changes idle or if it bubbles?
It is smoking white on cold starts and running a bit rough for 30sec to a minute, the smoke smells of unburnt derv. I'm suspecting glow plugs, but possible suspects could also be the EGR or injector seals. I can check the EGR simply by blanking it off and seeing if that solves the issue, which I'm planning on doing soon.
Asking here because ZSOC seems great if you like sikk intercoolers m8 and not great for technical help.
Secondly, any ideas on how to see whether or not injector seals aren't sealing properly? I have closely looked around all the bases and there doesn't appear to be any carbon build-up. Could I spray wd40 around the bases and see if it changes idle or if it bubbles?
It is smoking white on cold starts and running a bit rough for 30sec to a minute, the smoke smells of unburnt derv. I'm suspecting glow plugs, but possible suspects could also be the EGR or injector seals. I can check the EGR simply by blanking it off and seeing if that solves the issue, which I'm planning on doing soon.
Asking here because ZSOC seems great if you like sikk intercoolers m8 and not great for technical help.
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.
62k Diablo Phase 1 Gti-6: Project Thread
62k Diablo Phase 1 Gti-6: Project Thread