According to my Haynes Citroen ZX manual (the Owners Workshop Manual), there is a special grease called Mobil Temp G9 for the ARB end plates and seal lips on the tube ends. Although, it does say a good Molybdenum Disulphide grease can be used instead. Halfords sell it in tubs.
The Moly grease is also used on the splines, but I have used anti-seize compound in the past. 'Those' beams came to pieces easily (read - a couple of pulls on the slide hammer) when doing my annual check/regrease/replace seals.
The Moly grease is also used on the splines, but I have used anti-seize compound in the past. 'Those' beams came to pieces easily (read - a couple of pulls on the slide hammer) when doing my annual check/regrease/replace seals.
2001 BMW 330Ci
2012 VW High Up
1988 205 GTi 1.6
1990 205 Mi16
2012 VW High Up
1988 205 GTi 1.6
1990 205 Mi16