25-05-2015, 11:15 AM
(This post was last modified: 25-05-2015, 11:20 AM by maxzy.
Edit Reason: Mis-spelling and Mis-Information
)
Installation please see this link :
http://306oc.co.uk/forum/showthread.php?tid=161
And also, You and everyone can do it just need only some tools and other related part (New air filter, Clamp, etc)
About the result, After I installed to my 406 D8 with a pair of GTI6 Camshafts and Custom made exhaust system
Engine respond was better at the mid to High revs and the Top speed increasing about 10 km/h (Depend on Cam timing adjusted)
Only the intake manifold installation, From my experience I didn't see the difference
Only the suction noise is lounder ! (Maybe the low rev response were worse than stock !)
But the result with 1.8 maybe difference from my experience, and also my country weather not so
Good (AVG Ambient Temp around 30 Degree celsius and Avg humidity around 70 ! )
http://306oc.co.uk/forum/showthread.php?tid=161
And also, You and everyone can do it just need only some tools and other related part (New air filter, Clamp, etc)
About the result, After I installed to my 406 D8 with a pair of GTI6 Camshafts and Custom made exhaust system
Engine respond was better at the mid to High revs and the Top speed increasing about 10 km/h (Depend on Cam timing adjusted)
Only the intake manifold installation, From my experience I didn't see the difference
Only the suction noise is lounder ! (Maybe the low rev response were worse than stock !)
But the result with 1.8 maybe difference from my experience, and also my country weather not so
Good (AVG Ambient Temp around 30 Degree celsius and Avg humidity around 70 ! )
1999 306 GTI-6 PT81 & Remapping
2000 406 SRI 2.0 Turbo 6M/T @ 1 Bar Boosted
![[Image: 150521115952.jpg]](http://image.free.in.th/v/2013/is/150521115952.jpg)
2000 406 SRI 2.0 Turbo 6M/T @ 1 Bar Boosted