SRowells Diablo 1.8 - Jenvey 45s & OMEX600

[Eeyore]

Right so another evening. Crap day at work so wasnt very motivated. Did some work on the saab first but then onto the 306.

Cut up the old heater matrix pipes I had to replace the kinked oil hose. Took the hold one off and obviously hadnt been flowing well as it was full of this yellow gunk... Hopefully someone isnt going to tell me this is headgasket related...



and new pipe on....



and then gave it a quick wash down as it hadnt been cleaned for months. 



So yeh. Next steps are to get it up in the air and drop the subframe. then to remove the manifold and fit the gti6 one and then refit a second seam welded subframe ive got. GTI6 decat on, magnex on, lower strut brace on. Then I can get round to the beam but that isnt essential to get on track!

I will be working on the car in Melton, Suffolk for the following days. If anyone is around and wants to help please do!

Tuesday 19th May - Evening
Thursday 21sth May - Evening
Friday 22nd May - Afternoon, Evening
Monday 25th May - Evening
Tuesday 26th May - Evening
Thursday 28th May - Evening
Friday 29th May - Afternoon, Evening
Saturday 30th May - Afternoon
Sunday 31st May - All Day
Monday 1st June - Evening
Tuesday 2nd June - Evening
Thursday 4th June - Evening
Friday 5th June - Morning, Leaving for FCS!
FCS!