Brembos again

[welshpug]

Colin satchell's 310's under a 9x15" Revolution Escort Rally wheel..




AdamB's pendulum motorsport brackets and bells+hispec 310mm rotor with renaultsport brembo caliper.

as you can see, with the originally supplied cap heads they wont clear.




but with a much lower profile hex head they should hopefully be fine, if not there's enough material there to take a bit off to add more space, appears some of the closer edges on the top surface of the calipers have already been dressed back.





the pendulumn bells are just over 8mm thick IIRC, though not sure on the additional offset they have, here's the clearance at the rear to the balljoint, not a lot as you can see, btu radially on the hub itself you could probably go down a rotor PCD easily and use a 300mm or 295 to squeeze the calipers in under a 15" wheel a little easier.