306 wheels and suspension will fit but the seats wont.
I done this on my old berlingo van, if your keeping the 1.9 td box you will need the clutch cable off the 306, also you will need to use the down pipe and middle section off the 306 too. its pretty easy to do, just slots straight in and all i done for wiring was joined the starter motor wire off the engine loom to the ignition wire on the chassis loom and away you go.
![[Image: 20130812_201624_zpsoiiufpdq.jpg]](http://i1259.photobucket.com/albums/ii552/eddy-gti6/20130812_201624_zpsoiiufpdq.jpg)
![[Image: 20130812_201617_zpsivgds65v.jpg]](http://i1259.photobucket.com/albums/ii552/eddy-gti6/20130812_201617_zpsivgds65v.jpg)
![[Image: 20130825_125646_zpsttyiigql.jpg]](http://i1259.photobucket.com/albums/ii552/eddy-gti6/20130825_125646_zpsttyiigql.jpg)
![[Image: 20130825_132820_zps7p5yrojp.jpg]](http://i1259.photobucket.com/albums/ii552/eddy-gti6/20130825_132820_zps7p5yrojp.jpg)
I done this on my old berlingo van, if your keeping the 1.9 td box you will need the clutch cable off the 306, also you will need to use the down pipe and middle section off the 306 too. its pretty easy to do, just slots straight in and all i done for wiring was joined the starter motor wire off the engine loom to the ignition wire on the chassis loom and away you go.
![[Image: 20130812_201624_zpsoiiufpdq.jpg]](http://s1259.photobucket.com/user/eddy-gti6/media/20130812_201624_zpsoiiufpdq.jpg.html)
![[Image: 20130812_201617_zpsivgds65v.jpg]](http://s1259.photobucket.com/user/eddy-gti6/media/20130812_201617_zpsivgds65v.jpg.html)
![[Image: 20130825_125646_zpsttyiigql.jpg]](http://s1259.photobucket.com/user/eddy-gti6/media/20130825_125646_zpsttyiigql.jpg.html)
![[Image: 20130825_132820_zps7p5yrojp.jpg]](http://s1259.photobucket.com/user/eddy-gti6/media/20130825_132820_zps7p5yrojp.jpg.html)