CG clutch

[Frosty]

So last night i dug out my spare hdi engine, fitted flywheel and bolted up the clutch. I gave the pressure plate a few coats of paint so i could then see any fresh marks. Bolted up the gearbox and turned the engine over and it jammed. Its jams to the extent of when i turn it back anti clock wise it would undo the pulley bolt rather than turn the engine. Took the gearbox off and discovered some marks on the pressure plate and inside of the gearbox. Got a few pics though not the best but you can see what has happened







The gearbox had untouched paint on it as well and they are the marks the pressure plate has made. I think the pressure plate has to be wrong, though it fits and bolts up to the flywheel fine. Im thinking maybe for a 406 or 206 with hydraulic clutch? Maybe they have more room in the gearbox.

I was to busy to ring CG today so will give them a buzz tomorrow and see what they was