06-01-2015, 10:14 AM
It's not a fitting f*ck up mate. It's a machining problem. The splines were not properly machined around the top, this wasn't caused by some one smashing the box on
I tried fitting the input shaft from the back and it would only go half way if that
I've had the same problem on a 1.9 mi16 clutch before where the splines weren't machined properly
I tried fitting the input shaft from the back and it would only go half way if that
I've had the same problem on a 1.9 mi16 clutch before where the splines weren't machined properly
![[Image: IMG-20140815-WA0002_zps7bitwol4.jpeg]](http://i1224.photobucket.com/albums/ee365/paul13205/IMG-20140815-WA0002_zps7bitwol4.jpeg)