Dum-Dum's Black Rallye

[Dum-Dum]

Todays updates. I have a Peugeot sticker on the boot finally. Sadly I don't have the rallye decals on the drivers door as although I have one here it's a reproduction and so slightly different to what's there (which appears to be a different copy anyway) and I didn't want to cut the decal till I have the new front wing fitted (that I bought months ago).
[attachment=20451]
[attachment=20452]




I finally got round to cutting the welds holding the de-cat to the magnex (this wasn't a difficult job) and retapping the de-cat as most of the threads off the old lambda sensor were still in the hole. Sadly the new taps were too big to go in a tap holder so I used a socket on a t-bar. This was fine on the primary but the butt tap was a different size so had to be wound in with a spanner, fortunately it went in a few threads by hand from the primary so there was no chance of cross threading.
[attachment=20453]




I screwed in my new Bosch Lambda sensor.
[attachment=20454]




After fitting it all to the car I found out I didn't have a spare exhaust clamp that I thought I did so I had to get inventive again. (My mid section was welded to the cat)
[attachment=20455]




Thats her done for the christmas meet as all the fluids have been checked. I was going to wash her but with it trying to rain and how much crap is on the roads I think I'll do it when I get there.