03-11-2014, 10:10 PM
(03-11-2014, 09:55 PM)Piggy Wrote: Duno...need a trip to scrappy asap so will have a look
Let me know what you find!
(03-11-2014, 09:57 PM)procta Wrote: coming on well Srowell, was it hard to do the engine loom?
Looking back on it... the answer is no! The omex has a loom which connects to most thing and has the right connectors to begin with! Knowing how relays should be wired etc is essential but thats just basic electronics and anyone can understand that after 5 minutes of googling diagrams. The difficult bit is knowing which wires to strip out of the round connectors on the passenger side chassis leg! Even harder than that is wrapping the loom up and making everything the right length!
I drove round for ages with all the wires just taped up and the ecu in bubblewrap in the engine bay. Took a few months to get round to routing it through the bulkhead and putting it in conduit. My advice would be dont both with conduit and just use self amalgamating tape on the entire thing!