13-07-2014, 08:23 PM
The wire your holding is a 12v output to its the power out of the relay, it was probably going to the solenoid on the pump, but its to short unless you pulled it out of a connector?
Also the wire on the left of the relay (9 o clock position) is 12v in, it shoule be fed by an ignition live, but whoever fitted it could have broke the line and fitted a switch as a secondary precaution.
Thats of course if it is for a pump solenoid.
Also the wire on the left of the relay (9 o clock position) is 12v in, it shoule be fed by an ignition live, but whoever fitted it could have broke the line and fitted a switch as a secondary precaution.
Thats of course if it is for a pump solenoid.