26-06-2014, 09:04 PM
You've lost me here, what problem are you trying solve with these mounts?
How will 21mm torsion beams affect the mounts that hold the beam to the car? How are your mounts too soft? Unless you're absolutely caning it round bends I don't see how you feel the edge where the passive rear comes into real effect, or effecting lift off oversteer.
dampers, yes, possibly go for something slightly stiffer to go with the stiffer torsion bars.
but are we not talking the equivalent of top mounts on the front suspension? Its not the same as poly bushing the front bushes on the wishbones.
Not having a dig, but seems its just for the sake of rather than solving an issue, and given how long the 306 has been around i'd have assumed if there was a need for such a product it'd be about by now.
How will 21mm torsion beams affect the mounts that hold the beam to the car? How are your mounts too soft? Unless you're absolutely caning it round bends I don't see how you feel the edge where the passive rear comes into real effect, or effecting lift off oversteer.
dampers, yes, possibly go for something slightly stiffer to go with the stiffer torsion bars.
but are we not talking the equivalent of top mounts on the front suspension? Its not the same as poly bushing the front bushes on the wishbones.
Not having a dig, but seems its just for the sake of rather than solving an issue, and given how long the 306 has been around i'd have assumed if there was a need for such a product it'd be about by now.
![[Image: avatar_zpstlcgvhg8.jpg]](http://img.photobucket.com/albums/v363/toastmonster/avatar_zpstlcgvhg8.jpg){kind=avatar}