Is this illegal?

[Nathan1305]

They look exactly the same.... It's literally just a few mm between them, but that makes a massive difference when fitted.

The ball joint is on the end of the wishbone (3 bolts, or 3 rivets if aftermarket) and joins to the hub under where that shiny bolt head is. You need to measure from the end of the wishbone to the centre of the 'ball' on the balljoint ideally.

This is what it looks like out of the wishbone - http://www.ebay.co.uk/itm/like/331064225...108&ff19=0

Oh I've seen them I'll have to measure it all once I can get the wheel off